Replacement Hubs For Loadmaster Trailer With Tandem Axles
Updated 04/23/2014 | Published 04/22/2014 >
Question:
I have a 2002 Loadmaster trailer model 1921-6TD 6000GVWR and want to know what hubs will fit it. I am pretty sure it is 5 on 4 1/2 bolt pattern and either 14 or 15 inch rims. These are the rear hubs as the front hubs have disc brakes. Thanks!
asked by: Eric V
Expert Reply:
There are a couple of things you will want to know when selecting the hubs for your trailer. One is the weight capacity of the axles the hubs will be used on and second is the wheel bolt pattern. The axle may have a plate or sticker on it that says what the weight capacity is.
You can also check the numbers on the existing bearings and seals to find the right hub as well. Look for the number stamped on the ends or side of the bearings or seals.
Another way to determine the weight capacity is by measuring the axle using a precision instrument like a dial caliper.
Here's a breakdown on typical axle weight ratings based on axle diameter:
1,000-lb - 2,000-lb Axles: 1-1/2 in - 1-3/4 in diameter
3,500-lb Axles: 2-3/8 in diameter (Can have a 3-1/2 in diameter, but rarely)
6,000-lb - 7,200-lb Axles: 3 in diameter
8,000-lb Axles: 3-1/2 in diameter
9,000 lb Axles: 4 in diameter
10,000-lb Or more axles: 5 in diameter
I have attached a link to a helpful article that shows how to determine the wheel bolt pattern.
If you determine you have 3500 lb axles and you have a 5 on 4-1/2 bolt pattern, I recommend the Dexter Trailer Hub Assembly, part # 84545BX. This includes the bearings, races, seals and grease caps, as well as the wheel bolts and lug nuts.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer break away cable
- Search Results: bargman breakaway cable
- Search Results: ufp a 60 brake actuator
- Search Results: breakaway kit
- Video: Review of Dexter Axle Emergency Break Away Cable Repair Kit - DX64XR
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Search Results: trailer axles
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Q&A: Can Brake Actuator Be Used For Single AND Tandem Axle Brakes On Trailer?
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Q&A: Can Dexter Axle Disc Brake Actuator Be Used for Single and Tandem Axle Trailers
- Q&A: Recommended Hubs for a Snowmobile Trailer With 8 Inch Wheels
- Video: Remove and Reinstall a Trailer Hub Review
- Q&A: Method for removing and Installing Tang-Style Spindles Washers
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Suspension Enhancement
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: How to Measure Your Trailer Wheel Bolt Pattern



