Will the Reese Goosebox Hit Tonneau Cover Rails on a 2024 GMC Sierra 2500

Question

Question:

I have a 2024 GMC 2500 AT4X with a stanard bed and the GM folding tonneau cover. Will the 3rd generation Goosebox clear most tonneau cover rails when turning?

asked by: Mike

0

Expert Reply:

Mike, as long as your tonneau cover rails don't sit super high above the bed rails the Reese Goosebox # RP94716-61301 will work fine. We also have the 1" High Rise Ball # BWGNXA2050 which can get you a bit more clearance should you need it.

expert reply by: Bryce D

0

Answer 1

Well I'm certainly sorry to hear about the troubles you are having with your Airxcel unit, but you made a really nice choice to replace it with the Furrion Chill. I appreciate all the specific info you provided, so I double-checked with the…

view full answer...

Answer 2

You actually don't need to use a sliding 5th wheel hitch even though your 2024 GMC Sierra 2500 has a short bed. On other brand trucks (like Ram and Ford) the cab sits a bit close to the OEM puck system so you need a slider to prevent the 5th…

view full answer...

Answer 3

Hello Jeff, thanks for reaching out. Yes, the B&W Companion OEM 5th Wheel Hitch #BWRVK3715 will indeed fit your 2025 GMC Sierra 2500HD 6'10" bed with the factory puck system. We do recommend the slider hitch #BWRVK3775 for the short bet…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Will the Reese Goosebox Hit Tonneau Cover Rails on a 2024 GMC Sierra 2500

Products Featured in This Question

Continue Researching