Replacement Install Hardware for Draw Tite Hitch that Fits 2010 Honda Fit

Question

Question:

Recently bought a 2010 Honda Fit and it came with a Drawtighte hitch. It is missing the bolt/hardware install kit and instructions. Can you provide them ? Thank you Harald

asked by: Harald D

0

Expert Reply:

The Draw Tite hitch that fits your 2010 Honda Fit is the part # 24826 which I attached install instructions for on this page as well as an install video link. We sell replacement hardware for all of the hitches we offer with the part # RHK too.

expert reply by: Jameson C

0

Answer 1

The fish-wire that is referred to in the instructions is highlighted in the attached picture; this is going to be the way to get the bolts set up in holes that are tough to access otherwise. We do not have an install video for this specific front…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hey Rick, the correct adapter to from a Blue Ox base plate like the part #BX2253 to a Demco tow bar would be the part #DM9523041 and you'd be set. Do you have the rest of your flat towing setup picked out already as well?

view full answer...

Answer 8

Hey Mike, we do have the parts you would need to flat tow your 2009 Honda Fit behind your 2017 Winnebago Sunstar 29VE. The first thing you'll need is a base plate kit like the Blue Ox part #BX2253 which is my favorite design because of how well…

view full answer...

Answer 9

Hi Jennifer, From what I can find in the online owner's manual you should be able to flat tow your 2012 Honda Fit, but you'll have a list of steps to complete to get it ready to tow. As for the parts needed I have the following…

view full answer...

Answer 10

The Blue Ox #BX2253 is indeed the correct base plate for your 2011 Honda Fit Sport, it's compatible with all Fit models according to Blue Ox. In addition to the base plates, you'll need a few other items to complete your flat towing setup.…

view full answer...

Answer 11

The 2013 Honda Fit Online Reference Manual on page 159 states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motor home if the specific preparation procedures shown are followed. Those procedures are…

view full answer...

Replacement Install Hardware for Draw Tite Hitch that Fits 2010 Honda Fit

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching