Trailer Hitch Fitment for a 2019 Mini Countryman SE All4 Plug-In Hybrid

Question

Question:

Margarita asked about a hitch for the electric model. But Im looking for a hitch for my 2019 Mini Countryman SE All4 plug-in hybrid, the PHEV which is not a full electric. It appears that the C11522 would work, but am hoping that you can confirm one way or the other. It also appears that perhaps the eco-hitch 306-X7387 might, but Im more interested in the smaller class 1 curt. Thanks for the response

asked by: Mark

0

Expert Reply:

Thanks for reaching out, Mark!

The correct trailer hitch to fit your 2019 Mini Countryman SE All4 Plug-In Hybrid is the EcoHitch Hidden Trailer Hitch Receiver # 306-X7387. EcoHitch has confirmed that this will work on the Hybrid versions of your vehicle while Curt says their Hitch # C11522 is not compatible with Hybrid models.

I actually prefer the EcoHitch over the Curt anyways just because of the 2" receiver. The larger receiver means you'll be able to use a wider variety of accessories so you won't be as limited as you would be with the Curt option.

Let me know what you plan on using the hitch receiver for and I'll be more than happy to make an additional recommendation for you!

expert reply by: Jon G

0

Answer 1

Vehicle owners are protected when installing aftermarket items on their vehicles by the Federal Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Trailer Hitch Fitment for a 2019 Mini Countryman SE All4 Plug-In Hybrid

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching