Screws to Install Replacement Screen Frame for Ventline Vanair BVC0515-05

Question

Question:

This is the screen on my fan my screen is fine, but I need the strange little screws that hold this screen in place they’re not normal screws. It doesn’t appear that the screws are included with this screen anyway. What is the part number to order the screws?

asked by: Les

0

Expert Reply:

For screws to install the Replacement Screen Frame for Ventline Vanair # BVC0515-05 you would want the part # VC0270-00.

expert reply by: Jameson C

0

Answer 1

Hello Timothy, Welcome to etrailer, I'm glad you found us! I wasn't able to cross-reference the number from your axle, but we can get you figured out just fine without it. Typically, a tandem axle setup on a cargo trailer comes with (2)…

view full answer...

Answer 2

I believe that the only way to go about this, if you cannot get a tool in that space, is to do exactly like you said and go in from the outside. If you do not have the handle pulled all the way down, that could be the problem as well. I would assume…

view full answer...

Answer 3

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

Answer 4

Hey Brian! The BTBRV Trailer Jack Foot Scale #BTBRV014 is not designed to live on your trailer jack permanently. If you're traveling or storing your trailer you definitely want to remove it and replace it with your standard foot. If you're at…

view full answer...

Answer 5

It sure does Steve! Our 3,500 lbs etrailer Electric Trailer Jack w/ Tongue Weight Scale item #e43KV also comes in a 5,000 lbs capacity. We have two different options depending on how you want to power it that I have listed below: Wired to Trailer -…

view full answer...

Answer 6

Hey Moses! With that GVWR you either have the 2026 Grand Design Imagine 2670MK or the 2800BH. The correct rating for a weight distribution hitch (WDH) depends on your tongue weight. It looks like the dry tongue weight for the 2670MK is 785 lbs and…

view full answer...

Answer 7

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 8

The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…

view full answer...

Answer 9

When you install Nev-R-Adjust drum brakes like Dexter part #23-458 and part #23-459 the initial setup will be different. The Nev-R-Adjust has a small lever that prevents the brake star wheel from backing off as you do when you adjust standard brakes.…

view full answer...

Answer 10

I do have some options for you but in order to get the correct replacement spindle you'll need to know the inside diameter of the axle as well as the inner and outer bearings. The LM67048 bearing has a 1.250" inner diameter and we do have…

view full answer...

Answer 11

Thanks for the picture and info on your current brake assemblies, from that we know that the Dexter brake assembly part #23-106 that you referenced is the correct fit. For the left hand side you'd then want the part #23-105.

view full answer...

Answer 12

Hey Kevin, Both the #LM67048 and #15123 have a 1.250" inner diameter, so they are indeed interchangeable as far as spindle fitment is concerned. They will both fit the same spindle, but because they have slightly different outer diameters, the…

view full answer...

Screws to Install Replacement Screen Frame for Ventline Vanair BVC0515-05

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching