Does Integrated Brake Controller of 2005 Chevy Silverado Need Adapter to Be Used with Dexter Brake R

Question

Question:

My customer has a 2005 Chevy Silverado with a factory brake controller. Would he need the adapter for the Brake Rite 2 SD? Thanks.

asked by: Brad

0

Expert Reply:

The integrated brake controller of a 2005 Chevy Silverado does not require the use of an adapter with the Dexter BrakeRite II actuator part # T4813102 so you would not need the # T4845900 Brad.

expert reply by: Jameson C

0

Answer 1

Do you basically mean what is the diameter of the hitch ball shank?

view full answer...

Answer 2

In order to use the Titan BrakeRite Electric-Hydraulic Actuator #T4813102 with the OEM factory electric brake controller in your 2010 Chevrolet Silverado 3500 you'll need an adapter. The adapter you need is #T4845900.

view full answer...

Answer 3

I have a entire replacement option for you, but both the Titan BrakeRite and the replacement controller T4834200 you mentioned have been discontinued. They were replaced by the Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit #T4813102…

view full answer...

Answer 4

The Dexter DX Series #K71-651 and the Hydrastar Vented Marine #HS381-8067 are more comparable as they both have hardwire installations (just made by different manufacturers) while the Dexter BrakeRite II #T4813102 is more of a…

view full answer...

Answer 5

For a trailer with electric over hydraulic brakes, you will first need an electric over hydraulic brake actuator. I recommend the Titan BrakeRite EHB electric-hydraulic actuator #T4813102. I have included a link to the installation details for you to…

view full answer...

Answer 6

It looks like you have certainly done your research in regards to the HydraStar Electric Over Hydraulic Actuator and the Titan BrakeRite EHB Electric-Hydraulic Actuator. In regards to repose time, this goes to the Titan BrakeRite EHB with a response…

view full answer...

Answer 7

The truth of the matter is that there simply isn't an electric over hydraulic brake actuator that is going to work well with the factory brake controller in your 2013 Chevy Silverado because those controllers were designed for electric brakes…

view full answer...

Answer 8

A trailer that is equipped with an electric-over-hydraulic brake actuator such as the Titan BrakeRite EHB #T4813102 shown in your photos requires that the tow vehicle have a brake controller installed. The brake controller sends braking signals from…

view full answer...

Answer 9

The Titan BrakeRite EHB Adapter #T4845900 that you referenced is designed to work 2006 to current Chevy trucks that have integrated brake controllers like your Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit #T4813102 so it would fit…

view full answer...

Answer 10

I have attached the wiring diagram for the Titan BrakeRite EHB Electric-Hydraulic Actuator #T4822500 that you referenced. This particular actuator is designed for use with hydraulic drum brakes and features 1,000 psi of hydraulic pressure. I have…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Integrated Brake Controller of 2005 Chevy Silverado Need Adapter to Be Used with Dexter Brake R

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching