Does Draw Tite Hitch 75229 Fit 2017 Land Rover Range Rover Sport Diesel with Spare in Interior

Question

Question:

I have a 2017 Land Rover Range Rover Diesel. My spare is full size but it is inside not hanging underneath like what is shown in the installation video. Will the 75229 fit?

asked by: David C

0

Expert Reply:

Yes, the Draw Tite hitch part # 75229 does fit your 2017 Land Rover Range Rover Sport diesel that has the spare that is stored inside the vehicle. The spare only affects the fit of the hitch if it's one that mounts under the vehicle.

expert reply by: Jameson C

0

Answer 1

Curt has an alternative that could just work perfectly for you, without needing to cut or drill anything. If you have 10 inches of available width and 3-1/4 inches of height around the hitch, the Curt #C58000 Easy Mount Bracket would be the ideal…

view full answer...

Answer 2

For a 2016 Land Rover Range Rover, there is not an aftermarket trailer hitch option from any of our manufacturers. If they have a 2016 Land Rover Range Rover Sport then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class…

view full answer...

Answer 3

Thank you for the purchase of the Draw-Tite #75229 trailer hitch and T-One #118275 for your 2015 Land Rover Range Rover Sport! We have exactly what you need to mount the 7-Way connector without having to modify anything. If you use the Easy Mount…

view full answer...

Answer 4

The decorative cover or also known as the fascia will cover a portion of the Draw-Tite trailer hitch #75229, but not completely. I have linked a few photos to give you a better idea of how much will be covered. I have also liked some 2 inch Class III…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Does Draw Tite Hitch 75229 Fit 2017 Land Rover Range Rover Sport Diesel with Spare in Interior

Continue Researching