Brake Controller Install Connector that Fits 2022 Jeep Cherokee L

Question

Question:

Can you confirm this adapter will plug into a 2022 Grand Cherokee L?

asked by: John

1

Helpful Expert Reply:

We do have a brake controller install harness from Curt that fits your 2022 Jeep Grand Cherokee L with the part # C51446 but the Tekonsha you mentioned does not fit.

expert reply by: Jameson C

1

Answer 1

If your 2022 Jeep Grand Cherokee L has the factory tow package and you are using the Adapter #C51446 to connect your Curt Brake Controller #C87QV I would start by checking the connections. It may be one of the terminals in the connector ends have…

view full answer...

Answer 2

Hey Will, we have what you need to install the Redarc Tow Pro Liberty part #RED52VR in your 2021 Jeep Grand Cherokee but you will need to use the Curt harness part #C51446 instead as the Tekonsha one you mentioned is unavailable at this time. You…

view full answer...

Answer 3

If your 2016 Jeep Grand Cherokee does not have a trailer connector at the back but is pre-wired with the factory tow package then you can add a 4- and 7-Way connector using #HM40975-11933. Please note: It may be necessary to see a local Jeep dealer…

view full answer...

Answer 4

Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…

view full answer...

Answer 5

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 6

Hi Ed; there will be no need to have the computer flashed to install a brake controller like the #C28SV. You will plug it into the tow port and everything should work as intended. However, I do have a different recommendation for a brake controller.…

view full answer...

Answer 7

For the correct plug-and-play wiring harness to go with the Curt Spectrum Trailer Brake Controller #C51170 on your 2022 Jeep Grand Cherokee with a 7-way and tow package, that is the Curt Custom Wiring Adapter for Trailer Brake Controllers #C51446.…

view full answer...

Answer 8

For your 2019 Jeep Grand Cherokee, the harness connection point is under the dash to the left hand side. I've attached a photo to help as well as a video of this installation. If you are using a Tekonsha Brake Controller like the Prodigy P3…

view full answer...

Answer 9

A single green light with the Curt brake controller part #C74VV means that no trailer is connector and the manual override or brake pedal is pressed. If you are seeing that all the time you most likely have a short between the power wire of the…

view full answer...

Answer 10

Hey Joan, There isn't a Tekonsha custom-fit harness but there is a Curt harness #C51446 that you can cut the connector off of and butt connector #224775 on a Tekonsha connector #20127 so that you don't cut into your factory wiring. You'll…

view full answer...

Answer 11

The Curt Echo Under-Dash Bluetooth Brake Controller #C27JR will provide you with one of the easiest installations as the Pigtail #C51446 will connect it to your factory wiring. And unlike other controllers there is no dash mounted controller or knob…

view full answer...

Answer 12

Yes, the Curt Echo is compatible with the factory tow package on your 2024 Jeep Grand Cherokee, and it comes in the following designs: - Echo #C51180 - Echo Under-Dash #C27JR and Wiring Adapter #C51446 - Echo In-Line #C79DR Most people are referring…

view full answer...

Brake Controller Install Connector that Fits 2022 Jeep Cherokee L

Products Featured in This Question

Continue Researching