Recommended Parts to Use Rhino-Rack Pioneer Platform Rack on a 2024 Kia Telluride with Raised Rails

Question

Question:

What Pioneer platform rack can I use for my 2024 Kia Telluride? It has the raised rails from the factory.

asked by: LeRoy

0

Expert Reply:

I recommend installing a roof rack on your 2024 Kia Telluride and using the Rhino-Rack Pioneer Roof Rack Platform for Crossbars # RR42115BF. This will secure directly to crossbars so now we just need to get you a roof rack system and for that I recommend the Thule WingBar Evo which includes the following:

- 53" WingBar Evo Crossbars # TH711420
- Evo Raised Rail Feet # TH710401
- Lock Core Kit # TH450400 (optional)

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 4

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 5

Welcome back Frank! To add a 7-Way connector and brake controller to your 2024 Kia Telluride, I recommend the following parts: 7-Way Connector - Universal Installation Kit for Trailer Brake Controller item #ETBC7 Brake Controller - Redarc Tow-Pro…

view full answer...

Answer 6

Not at all, Steve - the spare tire goes right back into its original position once the TowSmart #TS84ZR is installed. The design allows full clearance for the tire and hoist cable. You’ll lower the spare temporarily for installation, then reinstall…

view full answer...

Answer 7

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 8

To install a 7-Way connector on your 2024 Kia Telluride you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item…

view full answer...

Recommended Parts to Use Rhino-Rack Pioneer Platform Rack on a 2024 Kia Telluride with Raised Rails

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching