2,000 lb Axle Leaf Spring Recommendation for Trailer that has 26-1/4 inch Long Springs
Updated 07/02/2020 | Published 08/17/2018 >
Question:
I have a escort boat trailer and needed a replacement spring and this one is the only one that matched the style and dimensions of the one I have currently. However the weight capacity is way to high for what I need. Can I take out a leaf perhaps the small upper one to soften the ride. My boat only weights around 1600 lbs
asked by: Nicholas J
Expert Reply:
Since trailer leaf springs tend to stretch over time the key to picking out the correct replacement is to go with one slightly shorter than what your current one measures. So a 26 inch long spring would most likely be what you need. For a 2,000 lb axle leaf spring that measures 26 inches in length we have the # e77SR which will fit and work well.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer suspension parts
- Shop: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long
- Search Results: trailer leaf springs
- Search Results: bearing buddies
- Search Results: jack relocation
- Search Results: 4 on 4 hub
- Search Results: slipper springs trailer leaf springs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Article: How to Accurately Measure Trailer Leaf Springs
- Search Results: waterproof wire connector
- Shop: Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" White Mod Wheel - 5 on 4-1/2
- Shop: Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: MEC RV Propane Quick-Disconnect Hose - Female QD x Male QD - 36"
- Shop: MEC Propane Quick-Disconnect Hose - Female QD w/ Cap x 1/4" Male NPT - 48" Long
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: The Low-Down on the Single-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Double Eye Spring 2000 lbs Trailer Axle - EM26AJ
- Video: Review of Tie Down Trailer Fenders - No Step Single Round Fender - TD38VR
- Video: Comprehensive Review: 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles
- Q&A: 25-1/4 Inch or 26 Inch 4,000 lb Double-Eye Spring For Trailer With 25-1/2 Inch Eye Spacing
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Hands-On with the CE Smith Trailer Suspension Shackle Straps
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: How to Determine the Capacity of Trailer Leaf Springs and How to Raise the Coupler Height
- Shop: Trailer Hitch
- Q&A: How Does the Rear Hanger Get Welded to the Trailer Frame
- Article: Trailer Wiring Diagrams
- Video: A Closer Look at the Single-Axle Trailer Hanger Kit for Double-Eye Springs




Jeff G.
6/29/2020
I have an old boat trailer (don't know the brand name) and I need 2 x 26" slip leaf springs. Do you carry those? I can only find a 30" and that will not work. The brackets are welded on the the frame and can not be moved any further apart. I would cut them off, but the frame does not extend any further.