EcoHitch Trailer Hitch For 2015 Ford F-150

Question

Question:

Hello. I was looking at North Hitch Front Hitch - x7913s from the torklift website and saw you are a certified seller. Do you have this part available? Thank you for your time.

asked by: Mario

1

Helpful Expert Reply:

Yes, we do! The X7913s hitch is our EcoHitch item # EH87SR. We just use a different part number. This front hitch is confirmed to fit the 2015 Ford F-150.

expert reply by: Jerred H

1

Answer 1

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 2

Hey Jean, we have the EcoHitch front hitch part #EH87SR that is a fit for your 2020 Ford F-150 King Ranch. You will need to remove the air dam though but this is standard step for your truck for any front hitch. Do you have the ecodiesel by chance?

view full answer...

Answer 3

Hey Dan, thanks for getting in touch. And good questions. For starters, there is no way to actually increase the vertical load rating of the Curt #C31083 front hitch. 500 lbs is the limit, and I cannot recommend using that to move a 750 lb tongue…

view full answer...

Answer 4

The weight capacity of a trailer will always be limited by its weakest component. You can in turn increase the weight capacity of the trailer by upgrading these components. Based on what you provided, the tires rated at 3,420 lbs for the pair are the…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

EcoHitch Trailer Hitch For 2015 Ford F-150

Product Page this Question was Asked From

Continue Researching