Replacement Hub And Drum Assembly For An 8 Lug Hub With 9/16" Studs
Published 11/03/2023
Products Featured in This Question
Question:
Im looking for a hub/drum assy. for a stock trailer the number cast in to the face of the drum is 030120, and its an 8 bolt with 9/16 studs. is there a cross reference for it in another line.
asked by: Josh B
Expert Reply:
I am happy to help point you in the right direction. With the information you provided we can certainly narrow it down. I will say that I could not find any references for the part number 030120 that you provided. So we will need to look at a few things in order to determine fitment.
All of the 8 lug hub/drums with 9/16" studs that we carry are rated for either 7,000 or 8,000 lb axles. So confirming the axle capacity would help to narrow down which hub you will need. Generally we also like to confirm the bearing sizes of the current hub.
All of these hubs are going to use the same bearing sizes with a 1.75" ID inner bearing and a 1.25" ID outer bearing. If you are able to confirm the bearing sizes or numbers and the spindle size, that will tell us exactly what will fit. Provided your trailer was made within the last decade or so, it should use the same standard sizing, but it is best to measure and verify. If your trailer does use the standard bearing sizes, you can choose from the following options:
Easy Grease Trailer Hub and Drum Assembly for 7K Axles # AKHD-865-7-1-EZ-K
Easy Grease Trailer Hub and Drum Assembly for 8K Axles # AKHD-865-8-EZ-K
Product Page this Question was Asked From
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.69 Inch I.D.
- 2.56 Inch O.D.
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles - 12-1/4" - 8 on 6-1/2
- Shop: Lippert Hub and Drum Assembly - 8,000-lb Axles - 12-1/4" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 8K Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly for Lippert ABS System - 8K Axles - 12-1/4" - 8 on 6-1/2
- Search Results: trailer hubs and drums
- Shop: Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - E-Z Lube - Qty 1
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles
- Q&A: Looking For Hub/Drum Assembly To Replace Dexter 8-285-8UC3-A
- Q&A: Needing Replacement Brake Drums With 5/8 Inch Wheel Studs on 8,000 Lbs Axles
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Shop: Replacement Trailer Axle Spindle Retainer Kit for Dexter Axles Manufactered After June 2002
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Search Results: 674862
- Search Results: trailer axles
- Video: Review of Lippert Trailer Hubs and Drums - Hub with Integrated Drum - LC57DX
- Q&A: Does the Lippert Hub and Drum Assembly LC57DX Take a Threaded Grease Cap?
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Bearings Races Seals Caps
