Is Curt Echo Trailer Brake Controller Compatible With Curt 7-Way Wiring on a 2018 Honda Pilot?

Question

Question:

I was wondering if the trailer brake controller listed below is compatible with my Honda pilot and the CU86FR wiring harness I recently installed? Pilot did not have the factory tow package and I installed a 2 hitch and 7pin harness myself. Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional Item # C51180

asked by: Konrad H

0

Expert Reply:

Yes, the Curt Echo Wireless Brake Controller # C51180 will work when connected to the Curt T-Connector Vehicle Wiring Harness # CU86FR on your 2018 Honda Pilot. This controller uses the input from the brake lights going to the trailer to send power from the charge line circuit on the 7-Way to the brakes.

You might also consider the Curt Echo In-Line Bluetooth Brake Controller # C79DR if you prefer to not have to remove and store the Echo device above when not in use. This plugs in behind the 7-way so there is nothing to remove when disconnecting the trailer.

expert reply by: Bud M

0

Answer 1

Hi Earle; in general, a weight distribution hitch is a no go for unibody vehicles. However, that is not an absolute. I don't see anything specifically calling out weight distribution in the owner's manual so it is possible if the manufacturer…

view full answer...

Answer 2

Yes, it can and that is exactly what you need! The Curt T-Connector Vehicle Wiring Harness item #CU86FR is custom fit for your 2017 Honda Pilot. It will provide you with a 7-way connector so you can tow a trailer with brakes. Some other parts you…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 5

Hey Matthew. No one makes a custom fit gooseneck hitch for a Silverado 5500 but we do have a couple of options depending on how your truck is setup. If you have a flatbed truck or one with a regular bed, you can use the B&W Turnoverball Underbed…

view full answer...

Answer 6

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Ray, so we have the part #18159 which would work great to secure the 7-way of the #ETBC7L that you'll be installing with the Curt Echo #C51180. It's also pretty easy to install too.

view full answer...

Is Curt Echo Trailer Brake Controller Compatible With Curt 7-Way Wiring on a 2018 Honda Pilot?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching