Recommended Hitch and Wiring Harness for a 2024 Mazda CX-50

Question

Question:

I need a hitch and wiring harness for a 2024 Mazda CX-50

asked by: Terry

0

Expert Reply:

To add a hitch to your 2024 Mazda CX-50, I recommended the Curt item # C38BR. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.

I really like the Curt hitch item # C38BR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance.

For a wiring harness you will want the Curt Item # C45FV. This custom-fit T-connector plugs into your Mazda's wiring harness, which is located behind the tail lights.

To round out your towing setup, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

expert reply by: Jerred H

0

Answer 1

The most hidden hitch for a 2024 Mazda CX-50 is the Draw-Tite item #DT67YR. This hitch is custom fit and bolts to your Mazda with included hardware. This is the most hidden hitch because the entire crosstube mounts behind the rear bumper leaving only…

view full answer...

Answer 2

To add a hitch to your 2024 Mazda CX-50, I recommend the Curt item #C38BR. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 3

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT67YR will fit your 2023 Mazda CX-50 Turbo without any issues. If you let me know what you plan on using the hitch receiver for I'd be more than happy to make an additional recommendation for…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Barbara! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C33MJ will indeed fit your 2026 Mazda CX-50 Hybrid. It actually fits all version of CX-50 for this model year, so you are definitely good to go with it. Even with the PP,…

view full answer...

Answer 8

Hey Mike, so I checked with Curt and their hitch part number 13630 which is our part number #C33MJ does fit the 2025 Mazda CX-50 hybrid. Curt says this actually fits all models of the vehicle actually. What are you planning on using the hitch for?

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey Doug, we have the Curt hitch part #C33MJ that is a confirmed fit for your 2026 Mazda CX-50 hybrid. I really like this hitch because it's mostly hidden and also it has great towing capacities. Will be doing any towing?

view full answer...