Recommended Suspension Enhancement To Reduce Rear End Sag On a 2024 Kia Telluride

Question

Question:

I've been noticing some rear end sag on my 2024 Kia Telluride, what would you recommend to resolve this?

asked by: Terri

0

Expert Reply:

I recommend installing the Coil SumoSprings Custom Helper Springs # CSS-1125R on the rear suspension of your 2024 Kia Telluride. These fit in between the coils to provide some additional support and help reduce sag. They require no maintenance or adjustment so you will not have any additional steps to perform.

expert reply by: Bud M

0

Answer 1

Yes, it does! The Curt Hitch item #C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 2

Yes, it will so long as your 2020 Telluride already has a 4-way connector like item #C59236 or item #CU94FR. The 7-Way RV Upgrade Kit item #ETBC7L requires a functional 4-way to connect to your Telluride. Please note that the 7-Way RV Upgrade Kit…

view full answer...

Answer 3

The best way to convert the 4-way trailer connector on a 2021 Kia Telluride to a 7-way is with the 4 to 7-Way with 4-Way Adapter part #ETBC7L. This option does not require any splicing into the vehicle. It however is designed to be used with wireless…

view full answer...

Answer 4

Hey Stephen, I would go with the SumoSprings kit part #CSS-1125R if you prefer a zero maintenance solution that once you install it you can basically never have to think about it again. The Air Lift air bag kit part #AL29PD would also work but it…

view full answer...

Answer 5

Hello Charles. I just checked with my contact at Curt and I was told that the Curt T-Connector #C68JR uses a 15 amp max fuse.

view full answer...

Answer 6

Typically the tongue weight listed on a trailer is the dry, or empty tongue weight. Tongue weight varies not only by how much stuff you have loaded in the trailer, but where it is positioned. You can add 200 pounds of cargo to a trailer and get the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Recommended Suspension Enhancement To Reduce Rear End Sag On a 2024 Kia Telluride

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching