Curt vs. etrailer Trailer Hitch For 2024 Subaru Forester  

The Curt #C67JR and the etrailer #e25TR seem very similar because they have the exact same design and specs. In fact, the only real difference between them is the powder coat finish. The Curt has a glossy finish while the etrailer hitch uses a matte…

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

Hello Chan; for a hitch that fits your 2022 Subaru Outback I recommend the etrailer Hitch #e25TR. This is a Class III hitch with a 2" receiver and a bolt-on installation. It has a concealed cross tube, so only the receiver is visible, and a…

The Tekonsha T-One #118304 and Curt T-Connector #C55580 Vehicle Wiring Harnesses are very similar. These are both custom fit wiring harnesses that include a tail light converter, which is required for your 2007 Toyota Sienna because the brake and…

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To tow a trailer with your 2022 Subaru Forester you will need a trailer hitch, wiring, and a ball mount. I recommend the following parts: -etrailer Trailer Hitch Receiver #e83ZR -T-One Vehicle Wiring Harness #118467 -etrailer Ball Mount Kit for…

Hey Brittany, That is a very good question, and for your 2022 Subaru Crosstrek I would definitely go with the Tekonsha T-One Vehicle Wiring Harness #118467. Tekonsha has proven to be the most reliable over time, and the fact it doesn't have a…

Hello Dale. Without the tool, you may be able to remove the towers with an appropriately sized allen wrench, however this can be tricky. For security reasons, Yakima designed their towers so that they are not easily removed without the tool provided.…

After speaking with my contact at Curt, he said that they felt that the ground used for the vehicle's taillights may not be sufficient on the newer vehicle's and could cause the Wiring Harness, #C56040, to not function properly. In an effort…

Both the Tekonsha T-One Vehicle Wiring Harness #118467 and the Curt T-Connector #C56040 referenced in your question are confirmed to fit your 2014 Subaru Outback 2.5i Limited. As you mentioned, both harnesses will install the same exact way, by…

Yes, if you can get the number stamped on your current Yakima key you can pick out replacement lock cores to match that number. You'll then need to just search our site for the part number Y8771-XXX where the X's equal your key number and…