Purpose of Mud Flap Looking Pieces in the Stromberg Carlson Leveling Kit with Wheel Chocks

Question

Question:

What are those pieces that look like mudflaps?

asked by: Kraig

0

Expert Reply:

The pieces in the Stromberg Carlson Leveling Kit with Wheel Chocks # SC35MR that look like mud flaps are non-skid traction mats to help keep the levelers from moving as you pull your trailer or motorhome up on them. They are a simple but effective part of the kit.

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

This is a great choice Joe and thanks for reaching out! Weigh Safe True Tow Weight Distribution Hitch #WS49MR would be a good match for your setup. Since your Grand Design toy hauler will have a loaded tongue weight between 1,300 and 1,600 lbs, this…

view full answer...

Answer 5

Hi James! With your GVWR being 7,600 pounds, your loaded tongue weight should be around 760 pounds. With that said, I recommend going with the Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 6" Drop - 8.5K GTW, 850 lbs TW…

view full answer...

Answer 6

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 7

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Answer 8

Hey Tony! Yes, the Weigh Safe True Tow Weight Distribution Hitch #WS37RR is a good choice and would have the proper rating for your setup. The smaller 1.2k TW model is going to be rated too low, or right on the edge, once you factor in propane,…

view full answer...

Answer 9

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 10

Thanks for the information Matt and congrats on your new trailer! For your 12,000 lbs Grand Design Reflection, I recommend the Weigh Safe True Tow Weight Distribution Hitch item #WS24RR for a 2" hitch or item #WS37RR for a 2-1/2" hitch…

view full answer...

Answer 11

Hey Steve. The 12.5K Weigh Safe True Tow Weight Distribution Hitch item #WS94RR is going to be the best option for your Jayco trailer. You've done your homework well and with the range of 760 lbs - 1,160 lbs tongue you are not going to want to go…

view full answer...

Answer 12

Hello Tim, Are you asking if you can back up with just the head installed on the Weigh Safe True Tow Weight Distribution Hitch #WS79VR, when you put the trailer coupler onto the ball? If so, then yes because at that point it is really just a ball…

view full answer...

Purpose of Mud Flap Looking Pieces in the Stromberg Carlson Leveling Kit with Wheel Chocks

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching