Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be reviewing part number AM3604. This is the Andersen camper leveler. One leveler is included, along with one chock. This is going to provide leveling at any increment, from a half-inch, to four inches. At its lowest point, we have a measurement of a half-inch. Then at its highest point, we have a measurement of right at four inches.
This is going to work great on trailers up to 30,000 pounds. The way this works is, you would place the wedge in front of, or behind, the tire of your trailer. That way you can actually drive on to these, or you can back on to them. Your tire is going to come on, here. It's going to level itself out with the leveling system.
Once you have that correct increment that you're looking for, between a half-inch to four inches of needing to be level, then what you can do is, you can take your chock, and place it under your leveler. You can see how the chock is cut to match any position that the leveler is positioned at. Another great feature about this system is, once you're ready to move your trailer off of the levelers, you don't have to get in there and struggle to really pull this out from your tire. You can simply just remove the chock, and drive your trailer off the front. This is going to flip up behind your wheel, and then you're good to go. Just grab your two pieces and put them into your storage compartment or under your vehicle, and you're ready to get on your way.
Another great feature about this is that it is just two pieces. There's no assembly required. A lot of leveling systems out there, you have to build or place together. In some cases, a lot of people that don't want to use chocks, will wedge a rock underneath their leveler. This is a really sturdy and stable unit.
It's going to work great for your application. A few dimensions that I would like to go over is, we have an overall length of right at 15 inches. Again, the height is four inches, and this provides a width of right at six inches. That's going to complete today's review of the Andersen camper leveler, part number AM3604.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews

Dave L.
8/8/2017
Still the best way to level my trailer. I have had many people ask me about these levelers.

Jim H.
8/27/2020
Best mod so far. Levels the camper quickly, easy on, easy off. I wouldn’t leave home without it.

Vern M.
10/25/2018
Still works great. People ask me about them when they how easily I can level my trailer w/o a spotter.

Linda M.
6/17/2016
We still LOVE these wheel chocks. They have made leveling our motorhome apiece of cake! I am really surprised I do not see more of these, as we travel! GREAT product!

Roger D.
8/20/2016
Just got back home after a 10 week trip throughout North America Canada

Roger D.
8/21/2016
Im back home after a 72 days trip across North America, Canada and USA. 33 different campgrounds or RV Parks. My Andersen Levelers made my 33 setups so quick and easy ! They are the best accessories I bought for my travel trailer in the past 7 years. So useful !

Dave S.
7/8/2016
I like the product a lot. Super easy to use, way better than blocks.

Motorcyclekelly
8/11/2020
Still work well but have some cracking issues. One had about a 2” tip break off. Now that same one has a big crack a couple more inches up towards the big end. It’s still working for the moment. I still like the way they work for our camper. One note, the chocks are light enough to blow out of the bed of the truck in transit. Now I throw the remaining one up near the cab.

Jack H.
2/11/2018
I havent used these wheel chocks as much as I thought I would. If I roll the wheels onto them until they get to the thickest part of the chock, it seems the wheel hangs off too much and Im afraid Ill mess up my tire. I went back to using the yellow blocks that stack. However, I havent tried them in several trips, so the next time I go, Ill take them with me and perhaps Ill only need to roll up about half way which may be high enough.Thanks for following up with me

Mike C.
9/20/2018
The Andersen camper levelers work as advertised. Im very pleased with them. They make leveling super easy. I have probably helped several other camper owners decide to buy a pair for themselves. Everyone who has asked about them was already familiar with them, but were wondering how they actually work. I recommended them highly.

Doug
8/26/2020
Its been a year and I still love it. The small wedge cracked but still works fine. If it ever becomes unusable I will buy another.

Kennedy
5/28/2015
Don, Do i need too buy two sets for a 2 axle travel trailer?

Dean
6/11/2015
Hi. Question on cutting. How did you know you had to cut. On my trailer I can fit in between the the leveller will touch the other tire. I dont think I have to cut but not sure.

Don
6/11/2015
It would be best to buy two sets, if you buy one, the leveler will only lift one of the two tires and the other tire will stay on the ground. You would only get half as much leveling lift.

Gerald W.
8/9/2020
Great

Brent
12/16/2019
Have used them several times and they are still working out great. Leveling is quick and easy.

Basil O.
4/2/2018
I still have the same issue when using it on a loose gravel surface. when it works, it works great. But it can be very frustrating when it slips. I have ordered a set of leveling blocks to use instead. This is heading off to the landfill.

Keith Z.
6/15/2018
I still am using and love both the clip on mirrors and the Anderson wheel chocks. I have actually had people ask me about the wheel chocks and I have told them how quick and easy they are to use. Thank you
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



















Bigmo
7/26/2020
Works well, needed some minor mods. 1 my axel spacing wasn’t wide enough to accommodate it so I did trim about 1-14” off one. 2 I felt it needed wedges on both sides, it only comes with one.