What Diameter Tube Does Thule Frame Cradle for Helium Bike Rack Fit

Question

Question:

I believe you have the Replacement Cradle for Thule Helium Pro Bike Rack - Item # 1500056001 for sale. I have a rack with 1 round bars that looks similar to the Thule and I think these would work with it. I just need to know the dimension of the mounting tube that this will fit to make sure it will work with my rack. Thank you.

asked by: Kris K

0

Expert Reply:

The cradle part # 1500056001 that you referenced is designed to fit a 1-1/4 inch diameter tube.

expert reply by: Jameson C

0

Answer 1

We do sell parts for the Thule Helium Pro Bike Rack for 3 Bikes #TH9043PRO. We have the following available: -Replacement M8 x 30 mm Bolt for Thule Apex, EasyFold, or Helium Pro Bike Racks - Qty 1 #852-3136-001 -Replacement HideAway Cradle Ratchet…

view full answer...

Answer 2

The cradles on your Thule Helium Aero Bike Rack are designed to slide back and forth but with a bit of force as well as help from a lubricant. If they are sliding back and forth without force or lubricant then there is an issue. Most likely, the…

view full answer...

Answer 3

Hello Jun; that cradle looks identical but it is not the right one for your Apex XT. What you need is the #1500056002.

view full answer...

Answer 4

The Replacement Anti-Sway Cradle #1500056002 has a diameter of 1-1/4". This is specifically made for the Thule Helium Pro bike rack models #TH9042PRO and #TH9043PRO. If you can provide which model bike rack you have then I can find a solution…

view full answer...

Answer 5

Hey Stan, so it should work but you need to measure the diameter of your bike rack arms to be totally sure. As long as they are 1-1/4 inch in diameter you could swap to the newer Thule frame cradle design that uses locking zip straps instead of the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What Diameter Tube Does Thule Frame Cradle for Helium Bike Rack Fit

Product Page this Question was Asked From

Continue Researching