Square Head Dimensions of Replacement M8 T-Bolt # 853-0782

Question

Question:

Regarding Item # 853-0782, What are the dimensions of the base or square part of this bolt, including the thickness of the square part. Thanks.

asked by: Mike K

0

Expert Reply:

The thickness of the square head of the part # 853-0782 is .3125 of an inch and the head is 3.4 inches square.

expert reply by: Jameson C

0

Answer 1

We have the longer Thule T-bolts part #853-0782 which also fit the Rhino Rack crossbar channels. We have knobs for them as well with #753-0776.

view full answer...

Answer 2

First of all, that's an awesome off-road trailer, thanks for the photo. As for the 60" Thule Roof Mounted Top Rack System #THTB60, it has tracks which we have measured before and found the inner track to be 0.8" wide and the top opening…

view full answer...

Answer 3

I spoke with my contact at Yakima and he went out and grabbed a #Y8810074 to measure and found it to be 1/8" thick.

view full answer...

Answer 4

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 5

I did some looking around and I found the Replacement M8 T-Bolt for Thule Roof Rack Gutter Feet #853-0782 with Replacement 3-Wing, High M8 Hand Knob for Thule Roof Mounted Watersport Carriers #753-0776.

view full answer...

Answer 6

The closest solution I can come up with for a longer bolt than the Thule Replacement Stainless Steel T-Bolt #853-5648 is going to be the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184. This replacement bolt has the…

view full answer...

Answer 7

The Yakima HD Crossbars #Y01159 have a 3/8" opening on the top of the bar which is 1/4" tall and 13/16" wide inside the slot opening. This will accept both the Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184 and…

view full answer...

Answer 8

Yakima has the T-bolt kit part #Y8880184 which includes a quantity of 4 T-bolts that are designed to fit in the tracks of their roof channels like what you have. These come with lock nuts as well.

view full answer...

Answer 9

The thickness of the T-bolt head of the part #Y8880184 you referenced is 5/32 of an inch. I attached a picture that has all of the other dimensions as well. These T-bolts are M10 x 1.5 x 25

view full answer...

Answer 10

The anchor plates that fit into Yakima roof tracks are the part #Y8810074 which is 3/4 inches wide. This is the same width as the anchor bolts of the #Y01162 which is designed to fit Yakima crossbar top channels. So the #Y01162 would work well…

view full answer...

Answer 11

The Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4 #Y8880184 will fit in the channels of your HD bars, but for the most part, crossbar mounted accessories will come with (or have available) T-channel hardware that will…

view full answer...

Answer 12

Hey Malcom. The highest capacity tracks we have are going to be the ones for Yakima HD bars. We have them in three different lengths depending on how big of a camper shell you have. I have listed them below: 54" - Yakima HD Tracks for Roof Racks…

view full answer...

Square Head Dimensions of Replacement M8 T-Bolt # 853-0782

Product Page this Question was Asked From

Continue Researching