2024 GMC Sierra 3500 Compatability with SumoSprings Rebel Custom Helper Springs

Question

Question:

Good afternoon, We are an independent repair shop in New York. We have a customer here with a 2024 GMC Sierra 3500, looking to install SumoSprings Part # SSR-203-47-2. We would just like to confirm that part will fit the vehicle. Thank you for your time.

asked by: Sophie

0

Expert Reply:

Yes, the SumoSprings Rebel Custom Helper Springs # SSR-203-47-2 will fit the 2024 GMC Sierra 3500 your customer has.

expert reply by: Jon G

0

Answer 1

You're experiencing the harsher ride because the overload springs engage when you tow, so what you're really needing to do is add some support to either prevent or delay the overload springs from engaging. I spoke at length with my…

view full answer...

Answer 2

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 10

Hey Jeff, I checked with Firestone and the only version of the 2025 Toyota Tacoma that the part #F83VV doesn't fit is the 2 wheel drive models. The SR5 can be either 4wd or 2wd so you would need to verify which configuration you have to know if…

view full answer...

Answer 11

As for comparing the Timbrens #TGMRCK15S to the Roadmaster Active Suspension Custom Leaf Spring Enhancement Kit #RAS54FR on your 2021 Chevy Silverado 1500 (4x4), the answer really depends on how much you tow or need suspension support for your Chevy.…

view full answer...

Answer 12

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

2024 GMC Sierra 3500 Compatability with SumoSprings Rebel Custom Helper Springs

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching