What Info Do I Need to Pick Out Replacement Leaf Spring for Trailer

Question

Question:

Im looking for the right leaf spring.

asked by: Gary S

0

Expert Reply:

To pick out a leaf spring for your trailer you would need to know two things. The axle capacity of the trailer and the current length of the springs installed now. With that you would be able to check out the link I attached to this page and see all of the replacement options we carry.

expert reply by: Jameson C

0

Answer 1

The Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles, #DX73QR is 26-5/8" long overall and to the center of bolt is 11-1/2".

view full answer...

Answer 2

The picture with the torn up bushing looks like the eye of your slipper spring. Is that correct? If so, it is coming undone and probably the reason you're having this problem. It should be enclosed and not look similar to the hook on the end of…

view full answer...

Answer 3

Since you are building a trailer I first want to state that using quad axles isn't ideal. It will cause tire scrub as there becomes too broad an axle base for the trailer to track as nicely. That is why most trailers will use tandem or triple…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

What Info Do I Need to Pick Out Replacement Leaf Spring for Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching