Availability Of 10 Rotor That Uses L68149 And L44649 Bearings
Updated 04/23/2024 | Published 09/29/2023
Products Featured in This Question
Question:
I have a 2002 Maxum SR2100 with an Escort trailer. Cant seem to find the correct hub tandem trailer. Has the 10 rotor and L68149 and L44649 bearings. Any help would be appreciated!
asked by: Don G
Expert Reply:
We do carry a few 10" hub and rotors that use the L68149 inner and L44649 outer bearings. A good one is the Kodiak # KHR10D. This is a dacromet plated rotor that used the 5 on 4-1/2" bolt pattern. Bearings and seals are sold separately so you will want the bearing kits # BK2-100 as well. Keep in mind that rotors are not universal, and we would need to know what brand brake kit you have currently in order to recommend the compatible replacement.
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: 8~435
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: brake pads
- Q&A: Replacement Hub/Rotor for UFP 41030
- Q&A: Replacement AC for a 15,000 btu Dometic 541816A711
- Shop: Replacement Drive Arm Assembly for Lippert Edge RV Awnings with LEDs - 58" Long - Black
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Search Results: ufp
- Q&A: How to Switch From Grease Hubs to Oil Bath Hubs on 3500-lbs Axle
- Search Results: ufp db42
- Q&A: Replacement Wheel Stud Recommendation for 10 inch UFP Rotor
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Do Trailer Tires and Wheels Need to be Balanced
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Suspension Enhancement
- Video: How to Choose a Trailer Brake Controller
on Trailer Hubs and Drums
Don G.
4/22/2024
Still messing with the escort trailer and the bad hub. I found a “kodiak 225”on the brake caliper. Does this mean the khr10d is what I need? Thanks for your help!