Does The EcoHitch # EH87FR Replace The Bumper Beam On A 2019 Mini Cooper

Question

Question:

In watching the video, it appears that you do not reinstall the bumper bar. Does the Hitch receiver, in effect, serve as the bumper baron the Mini COoper when installed ?

asked by: Fred B

1

Helpful Expert Reply:

Yes, crossbeam of the EcoHitch Hidden Trailer Hitch Receiver # EH87FR will replace the factory bumper beam on your 2019 Mini Cooper. This is pretty common with this style of trailer hitch since the whole idea is for it to be as hidden as possible so the manufacturer reinforces that beam enough to handle the impact of a collision like the factory beam would.

expert reply by: Kevin C

1

Answer 1

Yes, the EcoHitch Hidden Trailer Hitch Receiver #EH87FR will fit on your 2018 Mini Cooper S John Cooper Works 4-door hardtop. You can pair this with the Curt Towing Starter Kit #C45147 which has a 2" hitch ball with 3/4" rise. We do have…

view full answer...

Answer 2

Yes the EcoHitch part #EH87FR is a confirmed fit for your 2016 Mini Cooper S 4 door and would work great.

view full answer...

Answer 3

The EcoHitch Hidden Trailer Hitch Receiver #EH87FR you're looking at is not going to work with your 2022 Mini Cooper, however the EcoHitch Stealth Trailer Hitch Receiver #EH78SR will. This hitch has a max weight capacity of 1,500 lbs, a max…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does The EcoHitch # EH87FR Replace The Bumper Beam On A 2019 Mini Cooper

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching