Will a Yakima Cargo Box Fit on the Thule Xsporter Pro Adjustable-Height Truck Bed Ladder Rack

Question

Question:

I have a yakima box and would like to get the th500xt to put it and other stuff on the truck bed of my 2014 GMC HD 2500 truck. Thanks

asked by: Jamie C

1

Helpful Expert Reply:

Yes, Yakima cargo boxes like the SkyBox # Y07337 fit the Thule ladder rack # TH500XT.

The hardware can accommodate a bar that is 3-1/2 inches wide which is what the Xsporter bars on the ladder rack are.

expert reply by: Michael H

1

Answer 1

Based on what you are describing it sounds like both of the latches need to be replaced. The correct replacement part is the Replacement SuperLatch Handles for Yakima SkyBox Cargo Boxes - Qty 2 #Y8880348. I would try replacing the latches and go from…

view full answer...

Answer 2

Thule roof racks can be installed in Yakima tracks like what you have. You'd need the fit kit part #THKIT3101 and the Podium feet like part #TH460R and the crossbars #TH711120 and you'd be set.

view full answer...

Answer 3

It's hard to see in the picture if the lock assembly is damaged, but if the housing is okay you could install a new core with the part #Y07202. Seeing the core drilled out like that does warrant some questions though...like was the box stolen?…

view full answer...

Answer 4

I do have some options for you but I spoke to my contact at Thule and they said the Thule Pulse Large Rooftop Cargo Box part #TH615 cannot be used with a Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack like part #TH500XT because the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will a Yakima Cargo Box Fit on the Thule Xsporter Pro Adjustable-Height Truck Bed Ladder Rack

Continue Researching