Replacing Bearings On A 2003 Four Winds Boat Trailer
Updated 09/05/2023 | Published 09/02/2023
Products Featured in This Question
Question:
I need wheel bearings for a 2003 four winns boat trailer. Trailer model # is DO268. GVWR is 9998 lbs. Hub is 6 lug 5-1/2 bolt pattern. Do you carry them? Cannot find on website.
asked by: Bruce H
Expert Reply:
I can certainly point you in the right direction, but I do not have a way to look up bearing specs for a trailer based on a year make and model. If only it were so easy right?
Now since it is a 6 lug hub, and a GVWR just under 10K, you likely are dealing with either 5,200 lb axles, or 6,000 lb axles. These axles can use a few different bearing sizes/combinations. Most commonly it would be a # 25580 (1.75" inner diameter) inner bearing and a # 15123 (1.25" inner diameter) outer bearing. This is fairly standard these days, but since your trailer is about 20 years old, it may not use the same standard bearing sizes. It is always best to verify prior to ordering.
Since it is an older trailer, the best thing to do will be to remove one of the hubs and unpack the bearings. Get the bearing number off of each one, or take measurements with a caliper. This will tell us exactly what bearings you will need.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.75 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: dexter bearing kit
- Search Results: 15123
- Search Results: 25580
- Search Results: wheel bearing kit
- Search Results: lm67048
- Search Results: lm67010
- Q&A: Replacement Axle and Hubs for 2003 Four Winns Horizon 190
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Video: Breaking Down the Kodiak Trailer Hub for 3,500-lb Axles
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Q&A: How to Find Correct Bearing Kit for a 2004 Four Winns Boat Trailer with 5,200 Lb Trailer Axle
- Q&A: Replacement Trailer Hub for a 2004 Four Winns Boat Trailer with 6 on 5-1/2 Wheel Bolt Pattern
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Replacement Trailer Hub Bearing - 15123
- Shop: Timken Replacement Trailer Wheel Bearing - LM67048
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Search Results: 25580 bearing kit
- Q&A: How To Find the Correct Axle Replacement for a Four Winns Tandem Axle Boat Trailer
- Q&A: Replacement Bearings for Four Winns Single-Axle Boat Trailer
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
on Trailer Bearings Races Seals Caps
