Recommended European 7-Pin to US 4-Way Flat Trailer Wiring Adapter

Question

Question:

Hi, I need help with a wiring adapter. I have an american utility trailer 2 wire lighting flat 4 and I am going to be towing it with a european car. Can you recommend the adapter I need please. Thankyou!

asked by: Joanne M

0

Expert Reply:

There are a few different European trailer connecters but if you have the 7-pin European vehicle connector you will need the Trailer Connector Adapter item # 118710 to tow a trailer with a 4-flat.

If you have a different style of European connector go ahead and email me back with a picture and I'll be happy to find something that works for you.

expert reply by: Jerred H

0

Answer 1

Yes, the Curt harness, part #C56222, powers trailer lights regardless of whether the lights are LED or incandescent. It does only work on the Kia Souls that have incandescent lights and not LED lights so it's exactly what you need. If you also…

view full answer...

Answer 2

Yes, we do have exactly what you're looking for, for your 2018 Kia Soul! The Draw-Tite Sportframe Trailer Hitch Receiver #24915 will work wonderfully with your Kia, and is also a class I (1-1/4" x 1-1/4") trailer hitch like what…

view full answer...

Answer 3

The difference between the Draw-Tite #DT42MR and the etrailer #e27KR and Curt #C22HR trailer hitches for your 2023 Acura MDX is actually the amount of rear clearance as opposed to ground clearance. Ground clearance is the same between these hitches…

view full answer...

Answer 4

No. The 7-Way end in the #47405 adapter is made for the North American style of 7-Way round pins. A European 7-Way, see picture, has separate turn signals and brake lights and a circuit for fog lamps. The tail lights are also separate. You would need…

view full answer...

Answer 5

I confirmed with our trailer hitch manufacturers that each of the trailer hitch receivers are a fit for the 2020 Acura MDX A-Spec: - etrailer Trailer Hitch Receiver #e98840 - Curt Trailer Hitch Receiver #C13146 The three hitches are the same…

view full answer...

Answer 6

Normally what you would do is remove the tail light assembly that contains the reverse lights and test the wires for the reverse light circuit and tap in there. I have also heard that the reverse light circuit can be tapped into at the fuse panel…

view full answer...

Answer 7

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

view full answer...

Answer 8

It is possible to tow your US wired trailer with your European wired vehicle, but the solution with either be to install a new, or separate, trailer connector on your vehicle, or making an adapter from a few different parts. The main difference…

view full answer...

Answer 9

We do not supply a 9-pole to a 7-blade connector converter, but you can definitely convert your existing trailer connector to a 7-way blade connecter that will work with your truck. To do this you will need a replacement 7-blade connector like…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended European 7-Pin to US 4-Way Flat Trailer Wiring Adapter

Continue Researching