SumoSprings For a 2005 Winnebago Voyage 35A on Workhorse W22 or W24 Chassis

Question

Question:

Im having issues with finding rear SumoSprings for my 2005 Winnebago Voyage 35A. Do you sell a rear version of the SumoSprings that will fit my RV? Alternatively, is there any issue with installing Sumo Spring SSF-280-47 on the front and installing Timbren helpers on the rear?

asked by: Derek L

0

Expert Reply:

It appears your 2005 Winnebago Voyage 35A sits on Workhorse W22 or W24 chassis. These chassis will use the Front # SSF-280-47 and Rear # SSR-280-54-1 SumoSprings. I really do not like Timbren # TWRW22 being used as these springs are very stiff compared to the SumoSprings. This causes more shock to transfer through the suspension rather than being absorbed by it.

expert reply by: Bud M

0

Answer 1

Hey Mike, I'll go ahead and list out the highest-rated front and rear SumoSprings for your 2006 Workhorse W22 chassis (which fit so long as it is 2-wheel drive): - Rear: SumoSprings Maxim Custom Helper Springs - 7,000 lbs #SSR-280-54-1 - Front:…

view full answer...

Answer 2

Hey Amber, for your 2005 Winnebago Sightseer 29R on the Workhorse P32 chassis we have a Timbren kit for the front axle with the part #TGMFP30W which is very similar to the SumoSprings and would work great. We do have a SumoSprings kit for the rear…

view full answer...

Answer 3

Kelly you're spot on, thanks for reaching out! Since you mentioned you have “the bar that the Falcon 2 hooks to” that tells me your current setup on the Geo Metro is using a Roadmaster crossbar-style base plate. I checked fitment for both…

view full answer...

Answer 4

Hey Donald, for the front axle of your 2019 Ford E-450 RV the SumoSprings kit part #SSF-106-47 is what you will want. This will provide the front suspension an additional 1,000 lbs of suspension support which will help with handling and sway…

view full answer...

Answer 5

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 6

Hey Robert, thanks for reaching out! The Front Axle SumoSprings #SSF-280-47 sit in the same location as the Air Lift LoadLifter 5000 #AL88101 on your 2008 Winnebago so you'll need to choose one or the other. For a no maintenance setup I recommend…

view full answer...

Answer 7

Yes, the SumoSprings Custom Helper Springs Kit #SSF-280-47 that you referenced has been confirmed to work with the leaf spring suspension you have on your 2004 W22 Workhorse Holiday Rambler. I attached a picture that I took from the installation…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

SumoSprings For a 2005 Winnebago Voyage 35A on Workhorse W22 or W24 Chassis

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching