What Is The Thread Size For The Zerk Fitting On The Morryde Wet Bolts MR52HR

Question

Question:

What is the thread size of the Zerk fitting? Thanks

asked by: George

0

Expert Reply:

The Moryde wet bolts # MR52HR use a standard 1/4"-28 thread for the zerk fittings.

expert reply by: Jesse M

0

Answer 1

Typically a suspension bolt will be measured by the shaft of the bolt not including the head, since the head of the bolt isn't used in mounting the springs. The shackles are 3-3/4" long x 1-1/2" tall overall and the bolt holes are…

view full answer...

Answer 2

Hello Tom, thanks for reaching out. I do see you got the MORryde Suspension Upgrade Kit #MR76ZR from us about a year ago. The grease zerk size for this kit is M6 x1.0. We do not offer a 90-degree zerk but you should be able to find them online…

view full answer...

Answer 3

There are two different size shackle bolts that come with the MORryde Suspension Upgrade Kit for Triple Axle Trailers, part #MR92HR which is 2-15/16" long or part #MR52HR which is 3-3/8" long. The longer bolts are used on models with the…

view full answer...

Answer 4

No, that is not completely true. The wet bolts can be re-used as long as they are not rusted, cracked or damaged in any other way, to include the splines or threads being damaged. The main thing that you'd want to replace is the lock-nut which…

view full answer...

Answer 5

Hey Ashby, we have the part #MR92HR which is a 9/16 inch MORryde shoulder bolt that is 2-15/16 inches long. This should be close enough to work for you.

view full answer...

Answer 6

Hey Chris, thanks for reaching out. MORryde has the wet bolt kits for use with the CRE3000 kits like with the part #MR46ZR which has shackles that are 2-1/4 inches long. This kit comes with everything needed to replace the bolts, shackles and…

view full answer...

Answer 7

You can use the wet bolt #MR92HR for the center bolt on your CRE 3000 equalizer.

view full answer...

Answer 8

The 9/16" - 7/16-20 WET BOLT 2.90" LONG on your 2022 Grand Design Solitude 3540GK comes from a MORryde wet bolt kit. The part you need is the Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits #MR92HR.

view full answer...

Answer 9

I believe the 2022 Grand Design Solitude 5th Wheel's came with a MORryde Suspension Upgrade Kit that has wet bolts, heavy duty shackle straps, and bronze bushings. If this is what you have then the correct replacement wet bolt is the Replacement…

view full answer...

Answer 10

Hi Larry, Yes, the Solera Universal RV Awning Arms and Hardware Kit part #SO75FR is designed to work with several Carefree awning models that have an 8 foot projection. Specifically, it is compatible with the Carefree Spirit, Fiesta, Simplicity…

view full answer...

Answer 11

Hey Karl! This won't be too difficult to do. Basically you're going to bypass that whole system by disconnecting the control module and then you can install the DeeMaxx Disc Brake Kit #DE66AR. You will disconnect the OEM power harness and…

view full answer...

Answer 12

Hello Andrew, thanks for reaching out. Yes, the fan in the Furrion Chill Cube AC unit does run constantly when in auto, cooling or dry mode. This is by design. The only way to stop the fan is to turn the unit off. I verified this with my contact at…

view full answer...

What Is The Thread Size For The Zerk Fitting On The Morryde Wet Bolts MR52HR

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching