Trailer Wiring Harness for a 2014 Ford Focus ST Hatchback

Question

Question:

Is this wiring kit the correct one for a 2014 Ford Focus ST hatchback?

asked by: Greg

0

Expert Reply:

Yes, trailer wiring harness # 118549 will fit your 2014 Ford Focus ST hatchback. I have included a link to the installation instructions and a link to a video showing a typical installation for you.

expert reply by: Michael H

0

Answer 1

The Curt hitch part #C11158 has the towing capacities of 2,000 lbs total trailer weight and tongue weight of 200 lbs. As long as the trailer weighs less than that when loaded the HITCH would be okay to tow a trailer. Now you will need to check the…

view full answer...

Answer 2

There are 2 possible wiring harness options for the 2012 Ford Focus Hatchback. You could use Curt wiring harness, #C56140, that you have referenced. The other option is Tow Ready wiring harness #118549. I have included links to the instructions for…

view full answer...

Answer 3

When we installed the Draw-Tite Sportframe Trailer Hitch Receiver #24872 on a 2014 Ford Focus Hatchback in our shop we found the receiver height to be 10-3/4" from the ground. The Draw-Tite Drawbar #3593 gives you a 2-1/8" rise so that…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Trailer Wiring Harness for a 2014 Ford Focus ST Hatchback

Featured Help Information

Miscellaneous Media

Continue Researching