Offset of 14" Black Aluminum Liger Trailer Wheel

Question

Question:

What is the offset of Aluminum Liger Trailer Wheel - 14inch x 5inch - 5 on 4-1/2 - Black?

asked by: Terry

1

Helpful Expert Reply:

The Aluminum Liger Trailer Wheel # LH22FR has a zero offset, which is pretty standard for trailer tires.

expert reply by: Jon G

1

Answer 1

Hey Brian, The Goodyear Endurance ST205/75R14 Radial Tire w/ 14" Liger Aluminum Wheel #LH55VR does not come balanced (none of our 205/75-14 combos come balanced...or the vast majority of the other combos for that matter), but you can either have…

view full answer...

Answer 2

Your tire has a diameter of 26.3 inches and is approximately 8 inches wide, and the smallest tire the tan cover #B6102904 was designed to fit has a diameter of 28 inches and is nearly 9 inches wide, so it may be a bit loose, but it should still fit.…

view full answer...

Answer 3

Hey Lee, so in reality you may not ever have an issue using different Load Ranges on a trailer but it's really not recommended as the tires will have to have different PSIs which could in theory create ride issues.

view full answer...

Answer 4

A 205/75-15 size tire can actually fit on a wheel from 5 to 6-1/2 inches wide. With that being said, it's generally better to go with the thinnest wheel your tire fits on because that puts the weight on the wheel in the most vertical position so…

view full answer...

Answer 5

Hey Steve, like most trailer wheels the Aluminum Margay Trailer Wheel #LH34VR that you referenced has a zero offset. Unless otherwise noted you can basically assume that all trailer wheels have a zero offset.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Offset of 14" Black Aluminum Liger Trailer Wheel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching