Trailer Hitch Confirmed to Fit a 2024 Chevrolet Equinox

Question

Question:

Looking for a hitch that fits my 2024 Chevrolet Equinox, is there a fit yet?

asked by: Rex

0

Expert Reply:

Good news! There is a confirmed fit for a hitch for your 2024 Chevrolet Equinox.

- Curt Trailer Hitch Receiver # C77FR

This hitch is assembled in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.

If you plan to do any towing, you can round out a tow package by adding the Curt T-Connector Vehicle Wiring Harness # C94FR and the etrailer Ball Mount Kit # 989900.

expert reply by: Jesse M

0

Answer 1

There is very little actual difference between the two trailer hitch receivers that fit your 2022 Chevy Equinox (non-diesel model), which are the following part numbers: - Draw-Tite Max-Frame Trailer Hitch Receiver #76419 - etrailer Trailer Hitch…

view full answer...

Answer 2

Yes, it does! The Draw-Tite Hitch item #76419 has been confirmed to fit the 2024 Chevrolet Equinox. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. I have attached an…

view full answer...

Answer 3

I will try to keep this as simple and basic as possible. Cost effective 2" hitch for your 2018 Chevry Equinox: -Draw-Tite Max-Frame Trailer Hitch Receiver #76419. Wiring harness that only has stop/turn/tail functions (aka 4-way): -T-One Vehicle…

view full answer...

Answer 4

Hello Homer, thanks for reaching out. We do offer a wiring harness for the 2026 GMC Terrain Elevation without the factory tow package. For that you will need the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #TK68DR Are…

view full answer...

Answer 5

Hey David, yes the Draw Tite hitch part #36407 that you referenced does fit your 2007 Chevy Impala SS that has dual exhaust. I attached a picture of this hitch installed on a dual exhaust model for you to check out. What are you planning on doing…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I sure can Ryan. The Draw-Tite Hitch item #76419 does indeed fit the RS models of the 2025 Chevy Equinox. This custom fit class III hitch has a 2" receiver and will bolt directly to your Equinox with included hardware. What do you plan on using…

view full answer...

Answer 8

Hello Hannah, thanks for reaching out. Between those two hitches for the 2026 Equinox EV, the Draw-Tite #DT66KV has the best ground clearance. The crosstube for the hitch sits slightly higher compared to the Curt. With the Draw-Tite hitch it will be…

view full answer...

Answer 9

For your 2018 GMC Terrain with the 1.5L Engine I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver #76419. This is a Class III hitch with a 2" receiver with a 4,500 lbs Gross Trailer Weight (GTW) rating and a 675 lb Tongue…

view full answer...

Answer 10

Hello Bill, Thanks so much for reaching out about the harness. I just need a little more information from you if you don’t mind. I see that the T-One Vehicle Wiring Harness for Factory Tow Package #TK67KR is the correct replacement if your Terrain…

view full answer...