Replacement OEM Puck Anchors for Curt A25 5th Wheel Hitch

Question

Question:

I need a complete set of four 4 puck system bolts for a CURT A 25 fifth wheel Hitch

asked by: Michael S

0

Expert Reply:

The correct set of replacement Curt A25 anchors just depends on what vehicle you're needing them for! Here are the different options:

- Ford Anchors # C98UR
- Ram Anchors # C68UR
- Chevy/GMC Anchors # C93UR

Let me know if you're needing anything else!

expert reply by: Jon G

0

Answer 1

From the parts you recently looked at, it looks like you are asking about anchors for a curt fifth-wheel hitch. If you have a 2017 Chevy Silverado 2500, the part that works with a fixed hitch is the Replacement Anchors for Curt 5th Wheel Hitches for…

view full answer...

Answer 2

Thanks for the picture of Curt Q25 handles you need. Based on that the correct replacement is the part #C38UR.

view full answer...

Answer 3

Hello Wayne. The correct replacement anchors will depend on what Curt 5th wheel hitch you have. The #C93UR anchors are for the fixed Curt hitches and the #C53UR anchors are for the slider 5th wheel hitches. If you can tell me what hitch you have, or…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Replacement OEM Puck Anchors for Curt A25 5th Wheel Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching