Recommended 15 x 6 Aluminum Trailer Wheel with 5 Lug Pattern

Question

Question:

Need 4 wheels 15x6. 5in 4.5 un aluminum

asked by: Rolando F

0

Expert Reply:

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel part # AM22627 is an excellent option which is an aluminium trailer wheel that measures 15" diameter x 6" wide and has a 5 on 4-1/2" bolt pattern. That said, we also have some other styles as well for you to choose from.I have attached a full list of options below which contain both 15" x 5" and 15" x 6".

expert reply by: Conner L

0

Answer 1

Yes Brad, that absolutely makes sense. There’s a good chance you can reuse the Dutton-Lainson welded swivel mount already on your Boatmate trailer. The Dutton-Lainson #DL22339 uses a standard swivel-mount design, I attached a photo of the mounting…

view full answer...

Answer 2

You'll need to do some quick measuring of your backing plate/brake flange to see if you can use the 6,000 lb Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand #23-105-09. I have added photos below that I hope will…

view full answer...

Answer 3

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 4

Hey Dave, I do appreciate you reaching out but we do not offer any 15" 8 lug wheels. All of our 15" wheels will be either 5 or 6 lug. Any wheel with an 8 lug pattern will be either a 16" or 17-1/2" wheel like the Dexstar Silver…

view full answer...

Answer 5

Replacement Mounting Hardware for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs Item #MJ-1000B-MBB will actually be perfect for you. I checked the specs on the actual jacks that come with this hardware and it is basically identical…

view full answer...

Answer 6

For a replacement Dexter hub/drum for your 8-133 the correct hub would be the part number #8-201-5UC3. We have checked with Dexter in the past and this is for sure the correct replacement for the 8-133.

view full answer...

Answer 7

The Dexter 8-133 axle according to my contact at Dexter is an old motorhome axle they no longer make. Their tech said the motorhome axles like what you have are designed for one time use so there are not compatible parts made for even replacement…

view full answer...

Answer 8

Hello Constantin, thanks for reaching out. It might be possible to get a hub for your mobile home axle. Keep in mind that mobile home axels are not designed to be re used, and they typically do not use standard bearing combinations like most trailer…

view full answer...

Answer 9

I may have an option for you but mobile home axles are considered a one-time use only product and are not designed to be used on a standard trailer. Therefore, there are no hub conversion kits for them that will allow you to use standard…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended 15 x 6 Aluminum Trailer Wheel with 5 Lug Pattern

Featured Help Information

Miscellaneous Media

Continue Researching