Dimensions of Replacement Pivot Tube Inserts # 4000-V10

Question

Question:

What are the dimensions of the parts , outside diameter and length?

asked by: Stu

0

Expert Reply:

I attached a picture that has all of the dimensions of the Replacement Pivot Tube Inserts # 4000-V10.

expert reply by: Jameson C

0

Dimensions of Pivot Tube Inserts
(click to enlarge)

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Hey Mark, the max amperage draw of the Furrion RV Refrigerator #FR86NF and the GE Profile RV Fridge part #GE78FR are different but not by a ton. The max amperage draw for the Furrion is 12 amps and the GE is 17.5. This is only right at start up when…

view full answer...

Answer 5

Sounds like you are looking for the replacement pivot tube inserts part #4000-V10 as long as the tailgate you have is a Stromberg Carlson 4000 series tailgate.

view full answer...

Answer 6

We do offer the replacement latches for the Stromberg Carlson 2000 Series tailgate you have with part #2199.

view full answer...

Answer 7

The Stromberg Carlson 2000 Series 5th Wheel Louvered Tailgate for Dodge Trucks VGD-94-2000 has been discontinued. It was a fit for 1995-2001 Dodge trucks (1500, 2500. and 3500) as well as 2002 just 2500 and 3500 models. The replacement hardware kit…

view full answer...

Answer 8

Hey Scott. That's a lot to unpack and I have a couple questions. Leaning towards my answer being a hard no though. I am not sure what a moose gooseneck ball is but if your 2020 Ram 2500 has the factory puck system then you'll definitely need…

view full answer...

Answer 9

The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate #VGD-10-4000 has a 100 lb weight capacity so you will need to be mindful of what you put on it, especially if you are going to loading/unloading a 5th wheel hitch.

view full answer...

Answer 10

I spoke with my contact at Stromberg Carlson and they said that do not give the tailgate #VGT-70-4000 a weight rating because it is not designed to hold any large quantity of weight. They said in the open position, the tailgate will hold a small…

view full answer...

Answer 11

The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for GM Trucks #VGM-07-4000 does not offer a mounting place for the factory backup camera. If you want to continue using the backup camera on your 2013 Chevy Silverado then you…

view full answer...

Dimensions of Replacement Pivot Tube Inserts # 4000-V10

Product Page this Question was Asked From

Continue Researching