Tailgate Fit and Replacement Parts Available for Stromberg Carlson Louvered Tailgate for 5th Wheel

Question

Question:

I have a tailgate VGD-94-2000 and Im trying to find what trucks it will fit. All years and models.

asked by: John

0

Expert Reply:

The Stromberg Carlson 2000 Series 5th Wheel Louvered Tailgate for Dodge Trucks VGD-94-2000 has been discontinued. It was a fit for 1995-2001 Dodge trucks (1500, 2500. and 3500) as well as 2002 just 2500 and 3500 models. The replacement hardware kit and latches are still available using part # 2194.

expert reply by: Jason S

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 3

While we haven't had the opportunity to install the Curt #C15809, Curt #C15704, and Draw-Tite #DT45509 hitches, from what I could see in the photos customers have sent in it looks like the Draw-Tite will actually sit right up next to the bumper…

view full answer...

Answer 4

Hey Amanda, the Tow-Pro Link #RED57AR includes SwayStop Plus, which lets you manually activate the trailer brakes using the remote or app if sway starts. When pressed, it applies trailer braking independently of your vehicle brakes to help straighten…

view full answer...

Answer 5

Bulletproof Hitch products, including the #358smallshackle used to be made here in the United States. In Bradenton, Florida I believe. Recently though they have moved production overseas.

view full answer...

Answer 6

Hey Russell, thanks for reaching out! Sounds like you're needing the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #e98881, which has a keyed alike option on the product page and is made in the USA. Just change the option to…

view full answer...

Answer 7

Tom, It looks like that mounting bracket you're looking for has been discontinued because I wasn't able to find it through Lippert, I could only find it in a few places but they didn't have any stock. However, if you have the Vision S…

view full answer...

Answer 8

There aren't any trailer observation systems that are going to be able to display on your Garmin screen so you'd have to go with a kit that has a new monitor as well like the #FOS43TASF which comes with a 4.3 inch monitor. This is the…

view full answer...

Answer 9

Yes, I spoke with my contact at Stromberg Carlson and she said that both the #VG-97-2000 and the #VG-97-4000 5th wheel louvered tailgates will fit on the 2011 Ford F-250. I have added a link to all of the fifth-wheel tailgates we currently stock that…

view full answer...

Answer 10

I can end this debate for you real fast! Trailer tires, which will have an ST in front of the size, should always be inflated to the maximum psi indicated on the tire. Trailer tires usually do not have a recommended and maximum psi indication so I am…

view full answer...

Tailgate Fit and Replacement Parts Available for Stromberg Carlson Louvered Tailgate for 5th Wheel

Product Page this Question was Asked From

Continue Researching