How Much Does The 72" x 48" MORryde RV Cargo Sliding Tray # MR52FR Weigh? MORryde RV Cargo

Question

Question:

How much does this item weigh? MORryde RV Cargo Sliding Tray - 72inch x 48inch - 2 Way Slide - 80 Percent Extension - 500 lbs Item # MR52FR

asked by: A. H

0

Expert Reply:

The MORryde RV Cargo Sliding Tray # MR52FR weighs 144lbs. If you also need the Height Adjustment Kit # MR34VR because you have more than a 1-5/8" lip it weighs 13lbs.

expert reply by: Bud M

0

Answer 1

In my experience the MORryde Wall Mount #MR82ZR will require additional mounting height to allow it to clear the storage door opening on most RV's. I have had better results using the Mount #MR38DR in the area you are looking to mount the TV.

view full answer...

Answer 2

We have received multiple reviews from our users who have verified they were able to fit their 50', 50-amp RV power cords on the MORryde Manual Storage Reel #MR47RR. I have also included an image below which shows how much room is left on the…

view full answer...

Answer 3

We do have RV cargo sliding trays that are 42 inches wide, but none that are 56 inches long, though there are a couple that are close, if you are able to go slightly longer or shorter. The closest available are 48 inches long or 60 inches long, and…

view full answer...

Answer 4

The MORryde Manual Storage Reel #MR47RR has a lot of parts that are involved in the handle assembly. I have added a picture to help see the order. First onto the machined drum piece you will slide 2 white plastic washers. Then there are 3 wave…

view full answer...

Answer 5

Hey Tom! The overall dimensions of the MORryde RV Cargo Sliding Tray - 48" x 42" #MR73FR are 48" long x 42" wide x 6-5/8" tall (see attached) - this is for the tray and the rails when they are assembled and installed…

view full answer...

Answer 6

While there is no visual guide available to determine the sizing for the MORryde sliding cargo trays like the #MR38FR, it really depends on the height, length, and depth of your RV compartments opening. The #MR38FR that you were looking at, for…

view full answer...

Answer 7

We have two entry door lock options that can be keyless. I have listed them below, along with the cut-out dimensions that they fit. Unfortunately, your RV information does not tell me what size cut-out that you have, so you will want to verify that…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

How Much Does The 72" x 48" MORryde RV Cargo Sliding Tray # MR52FR Weigh? MORryde RV Cargo

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching