Replacement Suction Cup Mount For A Furrion 4.3" RV Camera Monitor

Question

Question:

I have a Furrion FOS43TADS, will this mount work on my camera? Please let me know, I see you have the standard mount for it if this one doesnt work. Thanks

asked by: John L

0

Expert Reply:

No, the Rear View Safety Extendable Monitor Mount # RVS-1419 is only compatible with their own brand of camera system monitors. Furrion uses a ball connector # LC776462 and makes it a different size than other brands so that you have to use only their model.

expert reply by: Kevin C

0

Answer 1

Yes, the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR will work great as a replacement monitor for your Furrion FOS43TADS monitor. This monitor measures 4-3/4" wide, 3-1/8" tall, is 1" deep, and…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Answer 6

Hey Ron! Thanks for providing the picture of your axle tag. Since you have a 3,500 lb #10 Torflex the #K71-707-02 is the correct lift kit for your axle. This has 8" between the mounting holes which will line up with the spacing on your brackets.…

view full answer...

Answer 7

Furrion and RVS camera systems use different mounts so the RVS Extendable Monitor Mount #RVS-1419 will not be compatible with your Furrion monitor. But we do offer a couple of universal-type monitor mounts that may be adapted to work with many…

view full answer...

Answer 8

I spoke with Furrion and found that this is a known issue with the wiring on the side marker cameras #FCE48TASL. A lot of people have been installing the trigger wire in with the power wire instead of running it to the turn signal or just capping it…

view full answer...

Answer 9

The Firestone #F2597 Ride-Rite system is what I'd recommend. The system is compatible with an in-bed gooseneck or 5th wheel hitch, and Firestone uses a superior roll crimp to join the bag to the upper and lower plates rather than steel bands like…

view full answer...

Answer 10

Hello Tony, thanks for reaching out. The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is what you will need for tandem 7K axles. You will also need new U-bolts part #APUBR-8. As far as converting to disc brakes,…

view full answer...

Answer 11

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 12

Hey Adam, for the hub rotor kit you'd want the DeeMaxx part #DE68YR which you'd need to order a quantity of two of these since you have a tandem axle trailer. This is correct for a 7k axle and has 9/16 inch diameter wheel studs. Then for a…

view full answer...

Replacement Suction Cup Mount For A Furrion 4.3" RV Camera Monitor

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching