Replacement Monitor for an Older Furrion FOS43TADS Monitor

Question

Question:

I need to replace my furrion monitor # FOS43TADS, will your FR77FR work as replacement?

asked by: John W

0

Expert Reply:

Yes, the Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR will work great as a replacement monitor for your Furrion FOS43TADS monitor.

This monitor measures 4-3/4" wide, 3-1/8" tall, is 1" deep, and has a screen size of 4-5/16" wide.

expert reply by: Bryce D

0

Jim W.

7/15/2026

I have the original Monitor for Furrion Model FOS43TADS and need the correct dash or window mount for it. The one I ordered doesn't fit. The ball is too big

Heather A.

7/15/2026

@JimW es, the correct replacement mount for your original Furrion FOS43TADS monitor is the Replacement Suction Cup Mount, part # LC776462. It was designed specifically for the 4.3 inch Furrion Vision S monitors and uses the correct ball size for that monitor. If the mount you ordered has a ball that's too large, it's likely intended for one of Furrion's 5 inch or 7 inch monitors, which use a larger ball than the 4.3 inch models. If you aren't completely sure which monitor you have, feel free to send me a photo of the back of the monitor or the model number label, and I'd be happy to confirm the correct mount before you order another one.

Jim W.

7/15/2026

@HeatherA that part you referenced is actually the one I ordered order#125114355 and the ball is too big I tried to use it to no avail. I can't attach a picture but Model number label says FOS43TASR

Answer 1

No, the Rear View Safety Extendable Monitor Mount #RVS-1419 is only compatible with their own brand of camera system monitors. Furrion uses a ball connector #LC776462 and makes it a different size than other brands so that you have to use only their…

view full answer...

Answer 2

For your Furrion FOS43TADS camera system, you can use the following: - Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR for a 4.3" monitor. - Replacement 5" Monitor for Furrion Vision S Wireless RV Camera…

view full answer...

Answer 3

When troubleshooting the monitor for the Furrion Vision S Wireless RV Backup Camera System #FOS43TASF there are a few things to check when the camera is not turning on and you are not getting the blue light. -Check the power cable is connected -Check…

view full answer...

Answer 4

I spoke with my contact at Furrion and the barrel connector size of the Furrion RV Observation Camera System part #FOS05TASF is 2.5 mm x 5.5 mm.

view full answer...

Answer 5

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

view full answer...

Answer 6

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 7

The first thing you'll want to check with your camera system is that power is reaching both the camera and the monitor parts. Cameras like the one in Furrion system #FOS43TASF can be wired either to a reverse light circuit (to operate as a backup…

view full answer...

Answer 8

Yes, every trailer that has the pre-existing wiring for the Furrion Vision S, like #FOS05TASF that you referenced, powers the camera via the running light circuit. So, you will need to have the trailer wiring hooked up to your tow vehicle and the…

view full answer...

Answer 9

Your new truck probably has a USB port so what you would need for your Furrion Vision S system part #FOS05TASF is a USB to cigarette light adapter which unfortunately we do not have. There's several options elsewhere online. Or if you wanted to…

view full answer...

Answer 10

Yes, it will. The 7-Way Vehicle Power Adapter for Furrion RV Observation Camera item #FR87PR provides a steady flow of power to your Furrion system. The electronics in the newer trucks like your 2022 Ram 1500 send a pulse signal that isn't…

view full answer...

Answer 11

For the newer GM trucks like your 2024 Chevy Silverado 2500 you do need to use the Furrion GM adapter part #FR87PR with the Furrion Observation Vision S systems like the part #FOS43TASF that you referenced. This is the adapter that the video you…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Monitor for an Older Furrion FOS43TADS Monitor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching