Recommended 4 on 4 Idler Hub for a 1 Inch Diameter Spindle
Updated 06/08/2023 | Published 06/07/2023
Products Featured in This Question
Question:
Looking for trailer hub for 4.80-8 4 bolt tire on a 1shaft, small Trailex aluminum trailer needs both wheels replaced. I have tires, rims, and shafts, need all other parts. Thanks
asked by: Rich P
Expert Reply:
For a 4 on 4 hub that fits a 1" diameter spindle, I recommend the Easy Grease Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-440-2-G-EZ-1K. This kit works with both inner and outer bearing item # L44643. You will need one per axle. Each kit includes bearings, grease seal, grease cap, and four lug nuts.
I have linked an installation video below.
I recommend using LubriMatic LMX Industrial Strength Grease item # L11390 to repack your bearings. You will want to grab one tube per axle.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Exterior Half-Moon Trailer Vent for 3" Diameter Hole - White
- Search Results: 480~12 trailer tires and wheels
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range B
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Video: Checking Out the Trailer Axle with Idler Hubs
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Trailer Hub - AKIHUB-440-2-EZ-2K
- Search Results: trailer axles
- Q&A: How to Determine Hub Face to Hub Face Dimension for Picking out Replacement Trailer Axle
- Search Results: sealed bearings
- Q&A: Replacement Trailer Hub Options for Trailer with BT8 Spindles
- Q&A: Replacement 12 Inch Wheel and Tire for a Harbor Freight/HaulMaster Trailer
- Q&A: Replacement Hub Assembly Needed for 4,800 lb 1992 Ranger Trail Tandem Axle Trailer
- Q&A: Availability of 4 Lug Trailer Hub that is Pre-Greased and Has 1-1/16 inch Inner Bearings
- Q&A: Greasing Trailer Axle Spindle Where Zerk Fitting Broke Off
- Q&A: Can Bias Ply Trailer Tires Be Used On Long Trips