Recommended 4-Way Flat Connector For a 2022 Honda CR-V Hybrid

Question

Question:

If I want to add a 4 pin flat trailer connector to a 2022 Honda CRV Hybrid, what would you recommend?

asked by: Troy

0

Expert Reply:

I recommend the T-One Vehicle Wiring Harness # 118741 for your 2022 Honda CR-V Hybrid. This will give you a 4-way flat connector. In my experience the Tekonsha modules have less issues than other manufacturers.

expert reply by: Bud M

0

Answer 1

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 2

Yes, we do have a hitch for your 2022 Honda CR-V Hybrid. It is the etrailer Trailer Hitch Receiver item #e98848. This is a custom fit hitch receiver that bolts to your CR-V Hybrid's frame with included hardware. If you are in need of a wiring…

view full answer...

Answer 3

Yes, the Curt Trailer Hitch Receiver #C13397 fits the 2022 Honda CR-V Hybrid model. It can be confusing sometimes but essentially it is saying that the hitch will fit both the Hybrid model and also if you do not have the Hybrid model. So don't…

view full answer...

Answer 4

For your 2024 Honda CR-V Hybrid I recommend the Curt class 2 hitch #C12169. We have found that this hitch is in fact compatible with hybrid models, contrary to what Curt may state. Take a look at the picture below, you can see the hitch successfully…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver #C12169 and the #C13397 have both been confirmed by Curt to fit the new 2023 Honda CR-V. This is most likely due to while they have updated the interior and exterior of the 2023 model year it is likely on the same…

view full answer...

Answer 6

According to Curt, neither the #C13397 or the #C12169 is a fit for Hybrid Touring Honda CRV models after the 2020 model year, but our installers have successfully installed it on such a vehicle, and we've received customer reviews confirming that…

view full answer...

Answer 7

Yes, the Curt hitch part #C13397 is a confirmed fit for the 2022 Honda CR-V. If you needed trailer wiring the Tekonsha kit part #118741 is a fit and installs easily. I attached install videos for both of these for you to check out as well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Recommended 4-Way Flat Connector For a 2022 Honda CR-V Hybrid

Continue Researching