Weight Capacity of BulletProof Hitches Shackle for Trailer Safety Chains

Question

Question:

Im looking for shackles to extend the chains on my camper. Id like to get a little more length when towing with my lifted f-250. The camper has a GVWR of 7450 and I want to make sure the weight rating on the shackles are 6500 a piece not 6500 across the 2.

asked by: Mike G

0

Expert Reply:

Each of the shackles that comes with the BulletProof Hitches Shackle for Trailer Safety Chains # 358smallshackle is rated for 6,500 lb like you are wanting.

expert reply by: Jameson C

0

Answer 1

When it comes to a hitch and coupler lock Set for a Demco hitch on your 2022 Airstream 25 foot Globetrotter The etrailer Hitch and Coupler Lock Set - 2 inch Hitch - 2-5/16 inch Ball #e68ZR will work unless you have a double-walled hitch or a factory…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 11

Hello Tom, Thanks for writing in. You are correct. I would not recommend using the B&W Digital Tongue Weight Scale #BW34KR with a McHitch coupler. The McHitch uses a different coupling design than a standard ball coupler, and I cannot confirm…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Weight Capacity of BulletProof Hitches Shackle for Trailer Safety Chains

Product Page this Question was Asked From

Continue Researching