What Information Is Needed To Find Replacement Axle For 2007-09 Rockwood Signature Ultralite 8240 SS
Updated 05/29/2023 | Published 05/25/2023 >
Question:
Looking for an axel for 2007-09 Rockwood Signature Ultralight Model 8240 SS, VIN: , the axel needed is the rear most axel.
asked by: Vincent S
Expert Reply:
I'd be happy to help find a replacement axle for your 2007-09 Rockwood Signature Ultralight Model 8240, but I have no way to look up what axle was used. Manufacturers use whatever axle they have on hand that day, so there's really no reliable database for this information.
You'll need to check the axle beam for an axle tag, and sending me a picture of that would be the easiest way for me to find you an exact replacement.
If the tag is missing which is very possible due to the age of your trailer, you'll need to measure the hub face and spring seat measurements which I've shown in a diagram below.
Once I can get either of these bits of information I'd be happy to recommend the correct replacement for you!
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Search Results: trailer axles
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Video: Measuring To Choose The Right Trailer Axle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles - 4" Drop
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axles
- Shop: Trailer Axle w/ Electric Brakes - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
- Q&A: Recommended Brake Assemblies and Hubs for a Old Style Trailer w/ a 6 on 5-1/2 Lug Nut Pattern
- Q&A: Replacement Shock Absorbing Pin Box For 2022 Grand Design 150 Series
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hydraulic Jack Leg That Can Be Used w/a Hydraulic System on a Dump Trailer
- Article: How to Measure a Trailer Axle
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How to Determine Hub and Spindle Size
- Q&A: How Much Clearance is Needed to Account for Suspension Travel on a Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Are for Brackets and Index Bars for etrailer RapidRamps Available Separately
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Hitch Receiver Sizes


