Availability Of A 4" Hitch Extension For A 2" Hitch  

The trailer hitch class ratings for passenger vehicles use numeric values, not aliphatic. These values include Class I, Class II, Class III, Class IV, and Class V. The trailer hitch options for a 2016 Jeep Wrangler (All Models) are class III, the…

For your 2023 Jeep Wrangler Unlimited, we have the etrailer Trailer Hitch Receiver #e98856. This hitch is made in the USA, has a bolt-on installation and will provide you with a 2" receiver. The 2" receiver is the most common size…

You will definitely need an extension to clear the rear tire on your 2021 Ford Bronco. When we installed the Yakima OnRamp #Y36FR on a 2021 Bronco we had to use the Yakima StraightShot Hitch Extension #Y69VR to make it fit. Normally bike rack…

The Hitch Extender For 2" Trailer Hitch Receiver, part #HE06, will give you an extra 7 inches of room. You will need to measure out 7 inches from the the pin hole on your hitch and that will tell you where your bike rack pin hole will…

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

When you use a hitch extender you will end up reducing the capacity of the vehicle by 50 percent like you mentioned. So your vehicle that has a 2,000 lb capacity would then be reduced to 1,000 lbs total trailer weight and 100 lbs tongue weight. I…

The shortest 2 inch hitch extender we have is the part #HE06 which has a distance of 7-3/8 inches from hitch pin hole to hitch pin hole.

Trailer hitches as well as adapters have some tolerances that means they may not be exact in regards to the opening being 2 inches or an adapter being fully 2 inches such as you may be seeing with the Curt Trailer Hitch Receiver #C13392. So what…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…