What is Weight Capacity of Curt Bike Rack for 2 Electric Bikes # C89JR

Question

Question:

What is the weight limit of this e-bike rack?

asked by: Don K

0

Expert Reply:

The weight capacity for the Curt Bike Rack for 2 Electric Bikes # C89JR that you referenced is 65 lbs per bike.

expert reply by: Jameson C

0

Answer 1

Ron, you’re in luck. The Thule OutPace Bike Rack for 2 Bikes - (1-1/4" and 2" Hitches) #TH39SA was made for setups like yours. The frame clamps are fully adjustable and pivot to grab almost any part of the frame, even on low-slung cruisers…

view full answer...

Answer 2

Both the Curt #C12100 Class II, 1-1/4 inch hitch receiver and the Curt #C13144 Class III, 2 inch hitch receiver use bolts that have a 1/2 inch diameter for the installation. For a fish wire bolt leader you can either use the 18 inch Curt #C58400 or…

view full answer...

Answer 3

The best bike rack for e-bikes that is also rated for a 5th wheel trailer is the Hollywood Racks RV Rider item #HLY64FR. This bike rack has an 80 lbs per bike capacity. It also fits tires up to 5" wide. One of the reasons the RV Rider Bike Rack…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

What is Weight Capacity of Curt Bike Rack for 2 Electric Bikes # C89JR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching