Replacement Slide Out Motor For A PowerGear 10106406 In A 2003 Fleetwood Pace Arrow

Question

Question:

Hello, I have a 2003 Fleetwood Pace Arrow on a workhorse chassis. I need a power gear slide out motor replacement. The original part # is 10106406. Can you tell me the part number to replace the original? Thank You

asked by: Rich W

0

Expert Reply:

The Replacement Gear Motor Assembly for Lippert Electric Slide-Out # LC386327 is going to be the correct replacement for the PowerGear 10106406 slide out motor in your 2003 Fleetwood Pace Arrow. I've attached a short video below where I'll walk you through the installation process with a similar motor so that you have a better idea of what you'll need to do to replace it.

expert reply by: Kevin C

0

Answer 1

We have the motor you need. The Lippert #LC383755 Gear Motor Assembly is a direct replacement for your Power Gear 521066 motor.

view full answer...

Answer 2

No, the Replacement Slide Gear Motor Assembly for Power Gear Slides #LC387738 is not the correct replacement for your Power Gear 521066. We have had this question about the 521066 come up before and the manufacturer has told us that the Replacement…

view full answer...

Answer 3

Hey Brand, thanks for reaching out. I completely understand why you want to confirm, some of the wording we have can be confusing. For the front of your 2002 Fleetwood Pace Arrow, you’ll need the SumoSprings Rebel Custom Helper Springs #SSF-172-40-2.…

view full answer...

Answer 4

I was able to determine that your Fleetwood part number of 500790 is same as 523900 which we know our replacement #LC368417 is correct for.

view full answer...

Answer 5

For a replacement motor on the Lippert Coach Steps for your 2002 Jayco Avatar, you will need the Replacement Motor #LC301695.We do not have an install video at this time.

view full answer...

Answer 6

Yes, the Lippert Components Kwikee Step Motor Conversion/Upgrade Kit #LC379145 is exactly what you need to upgrade your older style of 32 Series steps to the current style.

view full answer...

Answer 7

Hi Jimmy; is that 388807 or 368807? The 368807 motor was used in a lot of setups and can be replaced with the #LC368190. If the number is 388807 can you send me a picture? You can respond to the email with the link for this page and it will come…

view full answer...

Answer 8

I looked up pictures of your 8511 Glo-Brite incandescent lights, and found that they are 9-1/4 square tail lights. The closest light we have is going to be the Jeep-Style Trailer Combination Tail Light #ST60RB. It's has the same 4 functions as…

view full answer...

Answer 9

Starting with the brake controller itself, I highly recommend the Tekonsha Prodigy P2 #90885. This is an excellent proportional controller that will activate your trailer's brakes at the same time and with the same intensity that you apply to…

view full answer...

Answer 10

The best trailer hitch we have for your Workhorse W-22 Chassis is the Draw-Tite Ultra Frame Trailer Hitch Receiver part #41990-16. In order to fit the Ultra Frame to your Workhorse you will need to modify the brackets and crosstube to better suit…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Slide Out Motor For A PowerGear 10106406 In A 2003 Fleetwood Pace Arrow

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching