2003 Fleetwood Bounder Motorhome Gear Motor Assembly Replacement

Question

Question:

Hello - I need a Power Gear slide motor PN 521066W. Cannot locate on website. Can you help please?

asked by: Fred P

0

Expert Reply:

The direct replacement for your 2003 Fleetwood Bounder Motorhome gear motor assembly is the Replacement Gear Motor Assembly for Lippert Electric Slide-Out Item # LC386327.

I've attached a video that offers additional information about this part for you as well.

expert reply by: Kevin C

0

Answer 1

Hey Mark, thanks for reaching out, and congrats on the new camper! We have just the thing! Here is what I recommend: - Blue Ox SwayPro Weight Distribution w/ Sway Control for 2-1/2" Hitch - 15K GTW, 1.5K TW #BLU54TR The Blue Ox WD hitches are…

view full answer...

Answer 2

Hey Peter, what hanger dimensions do you need? What height from the mounting surface does the bolt hole need to be? With that I can see if we have a thicker gauge steel hanger option.

view full answer...

Answer 3

I do have some parts for you but we aren't custom trailer builders and adding electric to a trailer is not a simple task. What I can tell you is that most interior lights are 12 volt so if you want outlets, lights, and shore power you'd need…

view full answer...

Answer 4

If you're only wanting to setup AC service in your enclosed trailer then you could choose pretty much any 30 or 50 amp power inlet you wanted and then just run the appropriate gauge wire between the inlet and your panel. You can definitely…

view full answer...

Answer 5

Hi Jimmy; is that 388807 or 368807? The 368807 motor was used in a lot of setups and can be replaced with the #LC368190. If the number is 388807 can you send me a picture? You can respond to the email with the link for this page and it will come…

view full answer...

Answer 6

Hey, Tim! I reached out to Lippert on this one to make sure we get you the right motor. The one you were looking at, motor part #LC368221 wouldn't be the correct fit for you. The one you will actually need to get is going to be motor part…

view full answer...

Answer 7

Hey Tim, thanks for reaching out! If you're replacing a GE AC unit, then the GE Appliances Deluxe Plus RV AC #GE64FR will work with your thermostat, but if you're replacing a different brand of AC with this GE, then we'll need to get you…

view full answer...

Answer 8

Hi Bart, The correct replacement for your 130-1146 slide-out motor is the Replacement Gear Motor Assembly for Lippert Electric Slide-Out #LC386327.

view full answer...

Answer 9

The correct replacement motor for your Power Gear 521066 motor is the Replacement Gear Motor Assembly for Lippert Electric Slide-Out #LC386327. We have contacted the manufacturer about this on numerous occasions and the #LC386327 motor is the correct…

view full answer...

Answer 10

We can absolutely tell you the correct replacement for your 13-1115 slide-out motor; I verified for you the correct replacement part is the following: - Replacement Gear Motor Assembly #LC386327

view full answer...

Answer 11

To manually retract your slide-out you'll need to use a 5/8" socket on your Gear Motor Assembly for Lippert Electric Slide-Out #LC386327.

view full answer...

2003 Fleetwood Bounder Motorhome Gear Motor Assembly Replacement

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching