Recommended Hitch for a 2023 Hyundai Elantra

Updated 05/17/2023 | Published 05/16/2023

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(7)

$217.62

1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs

(2617)

$16.81

2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs

(2617)

$16.07

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2324)

$40.96

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(7)

$81.09

Question:

I have a 2023 Elantra Limited. Will this just bolt straight up? No cutting or anything? I do not want to cut anything.

asked by: Gavin V

Expert Reply:

The Curt Trailer Hitch item # C53NR requires both drilling and cutting to install on your 2023 Hyundai Elantra. I have taken some screenshots from the instructions and attached them below to show you these steps. I have also attached a picture that shows the Curt Hitch installed. At this time 5/17/2023 there are no other options for hitches for the 2023 Elantra.

The Curt Trailer Hitch item # C53NR is custom fit and bolts to your Hyundai with included hardware. It is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs maximum towing capacity and a 200 lbs maximum tongue weight.

If you are planning on towing you will also need a wiring harness item # TK86FR and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.