Locking Pin Recommendation for the Curt QuickPin No Latch A-Frame Trailer Coupler

Question

Question:

Is there a recommended lockable hitch pin for the Curt hitch pin coupler? I see Curt has instructed users to only use the supplied pin! Thanks

asked by: Robert

0

Expert Reply:

There is!

To replace the standard pin and clip on the Curt QuickPin No Latch A-Frame Trailer Coupler # C84DR Curt actually recommend the Hitch Lock # C23025 which is what I recommend going with!

expert reply by: Jon G

0

Dan H.

8/13/2024

Coupler writeup says it uses a 1/2 inch pin. Lock is 5/8 inch. Should not fit. What am I seeing thats incorrect?

Jon G.

8/14/2024

@DanH The installation instructions for the Curt QuickPin No Latch A-Frame Trailer Coupler # C84DR call for using 1/2" bolts for the installation, while the Curt Hitch Lock# C23025 is for the coupler.

Answer 1

The bolts required to install the Demco 50-Degree A Frame Trailer Coupler #DM13205-95 are 3/8" diameter x 1-3/4" long Grade 5 bolts. I spoke with the manufacturer and they confirmed that you won't want to use Grade 8 bolts on this…

view full answer...

Answer 2

I reached out to B&W to verify the height of the B&W Tow & Stow 2-Ball Mount #BWTS20040B. They informed me from the top of the hitch to the lowest point will be 11.1" This would only give you approximately 10.4" of clearance.…

view full answer...

Answer 3

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…

view full answer...

Answer 4

The B&W Tow & Stow 2-Ball Mount - 2-1/2" Hitch - 7-1/2" Drop/Rise - Black #BWTS20040B may have the correct rise/drop to tow your trailer level, but that will depend on the exact height of your trailer hitch receiver and the coupler…

view full answer...

Answer 5

The best 2-1/2" adjustable ball mount for your 2020 Chevy 3500 is going to be the B&W Tow & Stow 2-Ball Mount - 2.5" Hitch item #BWTS20037B. The stowable design allows you to store the ball and mounting platform underneath your…

view full answer...

Answer 6

I would be happy to help you pick out the right adjustable ball mount for your 2021 Ford F-250 Super Duty. The bottom portion of the receiver on your factory hitch sits 22 Inches from the ground. You are going to want the B&W Tow & Stow…

view full answer...

Answer 7

You make a great point and there is a set of locking pins that will secure every part of the B&W Tow & Stow item #BWTS20037B. It is the InfiniteRule Locking Pins for B & W Tow and Stow item #34061775-D. These pins will secure your ball…

view full answer...

Answer 8

To determine the amount of rise/drop you'll need, take a measurement from the inside top edge of the hitch receiver tube to the ground. Then, measure from the bottom of the trailer coupler to the ground. The difference between the two numbers…

view full answer...

Answer 9

So long as your F-250 has a 2-1/2" receiver then the B&W Tow & Stow 2-Ball Mount item #BWTS20037B will definitely work with your truck. This double ball mount has a 7,500 lbs capacity with the 2" ball or a 18,000 lbs capacity with…

view full answer...

Answer 10

For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part #BWTS20040B which fits the 2-1/2 inch hitch size and can do a drop of up to 7-1/2 inches. It also comes with both popular…

view full answer...

Answer 11

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount. I have attached a short…

view full answer...

Answer 12

The B&W Tow & Stow 2-Ball Mount #BWTS20040B is what I recommend. The B&W Tow & Stow is a very high quality hitch which has been time proven to be strong and reliable which is why I recommend it for towing your car trailer with your…

view full answer...

Locking Pin Recommendation for the Curt QuickPin No Latch A-Frame Trailer Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching