Trailer Hitch Receiver & Wiring For 2010 Ford Escape

Question

Question:

I am wanting to install a trailer hitch on a 2010 Ford escape without a factory installed hitch and with a full size spare. What is your recommendation? And does it come with wiring harness that will work without backup sensors?

asked by: TJ

0

Expert Reply:

The trailer hitch receiver I recommend for your 2010 Ford Escape is the etrailer Trailer Hitch Receiver # e56AR.

I like the # e56AR because of its matte black finish that hides the inevitable dings, scuffs, and scratches better than any other option. And while it does not come with a 4-way wiring harness you can get one separately, with the correct fit being the T-Connector Vehicle Wiring Harness # C56329.

The # C56329 does work on models without backup sensors.

expert reply by: Kyle S

0

Answer 1

There are several trailer hitches that will fit the 2006 Ford Escape and it is possible that those hitches will fit other vehicles so the opposite can also be true. I will break down each of the hitches to determine which vehicles they fit. Curt…

view full answer...

Answer 2

4-Pole wiring harness kits for your 2009 Ford Escape are not affected by the vehicle being a hybrid, although other aftermarket products could be affected by this feature. Part #118551 is a confirmed fit on your Escape that does not have the tow…

view full answer...

Answer 3

If I were choosing between the Tekonsha harness, #118551 and the Curt wiring harness, #C56329 for a 2007 Ford Edge, I would go for the 118551. Tekonsha has been in the wiring business longer, they have great support, and they work well if you take…

view full answer...

Answer 4

2 inch trailer hitches have the best weight capacities and the most hitch accessories made for them so whenever available this is the hitch size to go with. So for your 2007 Mercury Mariner you'd want the part #13650 for if you do not have a…

view full answer...

Answer 5

I spoke with my contact at Curt and he told me that the Curt Trailer Hitch, #C13651, does sit lower to the ground than the Curt Hitch, #13650. Both trailer hitches will fit the 2005 to 2011 Ford Escape without a factory hitch, but the #C13651 will…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75751 is made in Mexico. If you are instead looking for a made in USA trailer hitch for your 2011 Ford Escape then you would want the Curt Trailer Hitch Receiver part #13650. I have attached an…

view full answer...

Answer 7

I'd recommend a Curt Class III receiver for your Escape. Curt makes a great product with a durable powder coat finish. The hitch you need will depend on if your Escape is already equipped with the factory 1-1/4 inch hitch. If it is, you'll…

view full answer...

Answer 8

The best way to tow your Kawasaki Ninja with your Ford Escape is going to be with the etrailer Trailer Hitch item #e56AR. This hitch is custom fit and bolts to your Escape with included hardware. It is confirmed to fit the Hybrid model Escapes. I…

view full answer...

Answer 9

Yes, we do have a hitch for a 2010 Ford Escape. It is the etrailer hitch item #e56AR. This hitch is custom fit and bolts to your Escape with included hardware. The etrailer Hitch item #e56AR is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Hitch Receiver & Wiring For 2010 Ford Escape

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching